Spice Carousel Rotating Two Layers Organizer

Spice Carousel Rotating Two Layers Organizer

Boost
64
175
7
GIF

Print Profile(1)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
5 h
4 plates
5.0(4)

Open in Bambu Studio
Boost
64
175
7
6
50
33
Released

Description

Spice Carousel Rotating Two Layers Organizer

 

The perfect addition to your table or kitchen cabinet.

Organize your spices today. With a two-layer rotating spice organizer.


Two independently rotating trays.
Push the container on the inner tray to rotate it.
Gently press the edge of the outer tray and push to rotate it.

 

To move the entire organizer safely, try to evenly distribute the weight of the spice containers.
Interesting appearance.

It holds up to 15 spice containers with a bottom diameter of max. 44mm.

Boost Me (for free)

If you like my project give me a boost to support me.
Thanks!!

 

If the movement of both trays is not very smooth due to uneven print layers, use sandpaper on elements 1 and 3 and the bottom parts of the trays (in friction areas).


Detailed assembly instructions on YouTube video.

 

(1) Place a small washer on the base screw with the smoother part facing up (very important).
(2) Place the smaller rotating tray on top of this.
(3) Place the thinner hoop on the base. Point the smoother part upwards.
(4) Place a larger tray on it.
(5). Tighten the smaller tray with the round nut (with slight play). Notice the two different threads.
(6) Screw the longitudinal pin (handle) to the nut from above.
(7) Tighten the second part of the handle from above.
(8) Finally, place a thicker ring on the edge of the base. Press gently.

Comment & Rating (7)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
amazing
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
print came out excellent and the instructions was in the description. The only issue i have is that my seasonings don't fit in these slots. Should specify what seasoning containers they made this for.
0
Reply
Boosted
Great print!
0
Reply
ok
0
Reply
ok
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.