Summary

Train wheels for Jada Toys 1/32 Back to the Future DeLorean model. It is designed to roll on G gauge train track.

FDM printing recommended. I have not tried this with resin printing.

Print List:

2x Front Wheel
2x Front Wheel Spacer
2x Back Wheel

Rear wheel will need support. Try not to have support in the axle hole. The top of the hole is a cone, so set support needed for angles 70º or more to prevent support in the hole.

See post-printing instructions below.

Print Settings

Supports:

Yes

                                            Resolution:                      
0.1

Post-Printing

            Use dremel to make clearance for the front wheel flanges. Rear wheel wells do not need to be modified. 
                Pry off original wheels. Front axle will be longer than the rear axle. Press on the new wheels using a vice. Front wheels will need one spacer on each wheel. Rear wheels have the spacer designed into the wheel itself. Make clearance around the front wheel wells to for the flange of the train wheels.