Angle adjustable Phone/IPad stand for video calls by SaiKiranGoud

SaiKiranGoud

Tools>Organizers

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 25% infill

2.1 h

1 plate

4.0(1)

Open in Bambu Studio

Boost

Released

Description

3D printable Mobile and IPad Stand with Angle adjustments and with charging provision. Perfect for long video calling sessions.
Its semi print in place.

Print 2 units of Part 4

Some assembly required, clip the part 4 into slots in main model as shown in images. For better IPad usage I better suggest to increase of model sizes by 1.2x and to super glue the parts after cliping.

Settings
Slicing tolarence - exclusive

You only need support for Part 4

Model printed on 0.4mm nozel

If you want the model for customization and improvements.

https://cad.onshape.com/documents/16ecb69895d42303d879e9cc/w/0d73c94d35ca6385ebee4b0a/e/bf06ecaebb7eb16bfd1901b2?renderMode=0&uiState=671f74b773c5d12cced00802

But please credit

Comment & Rating (9)

@domkoc

It has some hanging parts. The hinges push the whole stand up a bit. With this configuration the built either requires support or will fail (as it did for me).

The designer has replied

@saiKiran

Only the Part 4 needs supports but the main models doesnt need any supports. Can you share any images as reference, to get some clarity on the issue. As mentioned in the description, if you want to use with IPad or top heavy phones, you need to increase the size of the models and super glue both parts.

@domkoc

Replying to @saiKiran :

As you can see, it generated a brim and also gave an error from the uploaded 3MF file. I solved it by flattening the bottom with a negative part. But maybe it could be fixed in the model. Thanks for the quick answer.