Gnome figurine - Gnome with a Lantern.

The uncolored model was printed using Sunlu PLA+ White and is ready for painting.

Height: 157.40

The white gnome was printed using:

Standard 0.4 nozzle

The slicer settings:

• .20 mm Standard
  Infill % - 15 , Grid
• Seam Position- Aligned
• Seams were hand-drawn

Supports enabled

• tree (auto)
• build plate only
• Threshold Angle: 25
• Top Z: .30
• Bottom Z: .2
• Top Interface Layers: 1
• Bottom Interface Layers: 1

The 100 mm multi-color print profile was printed using 4 colors on an A1.

• Sunlu PLA+ White
• Sunlu PLA+ Beige
• Eryone Matte Red
• Eryone Matte Olive Green

Standard 0.4 nozzle

The slicer settings:

.20 mm Standard
Infill % - 15 , Grid

Seam Position- Aligned

Seams were hand-drawn

Supports enabled

• tree (auto)
• build plate only
• Threshold Angle: 25
• Top Z: .30
• Bottom Z: .2
• Top Interface Layers: 1
• Bottom Interface Layers: 1