Bambu Scraper Grip for Door Handle V2 by Mazzi

Mazzi

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 15% infill

Designer

31 min

1 plate

4.9(363)

ASA - 0.2mm layer, 3 walls, 20% infill

43 min

1 plate

4.7(6)

Open in Bambu Studio

Boost

757

1891

623

284

2.4 k

2 k

Released

Description

NEW VERSION HERE: Bambu Scraper Grip for Door Handle V3

The new version features a new larger and sturdier grip and 3 different lengths, be sure to check it out!

The second version of an easy to print and easy to assemble scraper that fits the Bambu door handle.

You can find the previous version HERE!

This version includes a small blade blocker that prevents the screws from vibrating against the printer door glass. It also makes it easier to keep the blade in place while tightening the screws during assembly.

Let me know what you think and how you would further improve this project!

and, if you’d like to, you can

buy me a coffee

Assembly instructions here!

Bill of Materials

Maker’s Supply Kits and Parts

Bambu Scraper (3PCS) - FAC002-N

$3.99 USD

FAC002-N

× 1

BT2.6x8 SHCS Self Tapping Screw (20PCS) - AA004

$1.49 USD

B-AA004

× 1

Buy Now

Download BOM

Comment & Rating (623)

@68Fastback

Print Profile

0.2mm layer, 3 walls, 15% infill

Nice print. Wish the handle was longer and wider. Longer to stick out and use as a door handle. The way it is now, it works but would be more comfy if it were longer. Over very good so far.

The designer has replied

@mazzi

thank you for the feedback! you gave me some ideas for the next versions, stay tuned!

(Edited)

@mazzi

@68Fastback I just published a new version, check it out!

@68Fastback

Replying to @mazzi :

awesome update. I will print and boost for your effort and quick turnaround.

@user_4127270539

Print Profile

0.2mm layer, 3 walls, 15% infill

good sturdy tool 👌

The designer has replied

@mazzi

what do you mean? it seems that you are missing one piece, did you read the assembly instructions?

@user_4127270539

Replying to @mazzi :

🤦‍♂️ apologies I missed the other bit

@mazzi

Replying to @user_4127270539 :

no problem!

@Cruzzer

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

very useful..

The designer has replied

@mazzi

thanks for the rating!

(Edited)

@Cruzzer

Boosted

Replying to @mazzi :

np...

@Cruzzer

Boosted

Replying to @mazzi :

np.

@Jimbo3000

using PLA it was weak at this point and broke. would work perfect if it had that mesh throughout the body.

The designer has replied

@mazzi

are you sure it wasn't a print issue? I've had this handle for months and I've never had such a problem

@Jimbo3000

I was bending/prying off objects rather than scrap, the plate that came with the a1 mini has a lot of texture and prints really adhere to it. scrapping wouldn't do the job to get some items off so ended up need to use a lot of force and pry them off so I think that's why it broke.

@mazzi

@Jimbo3000 I just published a new improved version, check it out!

@Pisty

Print Profile

0.2mm layer, 3 walls, 15% infill

Fits the blade that comes with my P1S perfectly and makes it easier to use its door!

The designer has replied

@mazzi

thanks for the feedback and for the rating! btw I think you assembled the wedge upside down! ;)

@Pisty

Replying to @mazzi :

@mazzi woops! at least we know that even if done wrong it works great haha

@EJLeonard

Print Profile

0.2mm layer, 3 walls, 15% infill

Works perfect. Make sure to squeeze down on the wedge when tightening the last bit if the screws. Also, stop once the screw heads are barely past below the surface too keep then from sratching the bed plate.

The designer has replied

@mazzi

thank you!

@Penny218

Print Profile

0.2mm layer, 3 walls, 15% infill

Easy printed, better than the default design, I printed with petg I think pla might be too weak in structure

The designer has replied

@mazzi

thanks for the rating! and take a look at the new version I just published ;)

@gerardolandaver

Print Profile

0.2mm layer, 3 walls, 15% infill

Printed perfectly

@coldhands

Boosted

Print Profile

0.2mm layer, 3 walls, 15% infill

Great design using the included parts and sample PLA from the P1S kit. Print was easy with no issues, assembly was a breeze. I can open my door a little easier now too :)

The designer has replied

@mazzi

thank you for the feedback and for the rating!

@Mai_C_NL

An ingenious design I cannot modify the blueprint so I sanded down the smallest component to fit the original sheath

The designer has replied

Show original

@mazzi

thanks for the feedback!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.