Interstellar Ranger with Display Stand

Interstellar Ranger with Display Stand

Boost
319
617
31

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
2.1 h
1 plate
4.9(9)

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
12.4 h
1 plate
4.6(13)

Open in Bambu Studio
Boost
319
617
31
42
567
115
Released

Description

Interstellar Ranger Spacecraft 3D Model

Take your love for space exploration to the next level with this detailed 3D model of the Interstellar Ranger spacecraft! This 3D printable model captures the rugged design of the Ranger, with detailed wings, sleek body lines, and realistic thruster placements. 
 

Features:

High Detail: Captures key design elements from the Ranger spacecraft in Interstellar.
Display Stand: Simple display stand.
AMS: Multicolor optional, but definitely recommended!

 

Support the Maker!
If you enjoy this model, please follow for more interstellar designs and give it a boost!

Join the Discord community for early access to print files, design tips, and special member-only events! Connect with fellow creators and take your projects to the next level!
https://discord.gg/nznEDhcD9c
 

Boost Me (for free)

🚀🚀🚀🚀🚀

Comment & Rating (31)

Please fill in your opinion
(0/5000)

Boosted
Always wanted a model of this ship! Maybe I'll make a display stand that looks like a giant wave, lol!
8
Reply
Boosted
Printed BEAUTIFULLY on my A1 Mini (w/ AMS). Supports underneath look wild, but come off nicely. Wish the stand fit a little more snug, but it holds just fine. Phenomenal model! Thanks so much!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
ottimo
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
this model is awesome! congratulations!
1
Reply
Boosted
Print Profile
0.16mm layer, 2 walls, 15% infill
this model is awesome! congratulations!
1
Reply
Could you do a version where the parts are separated? (possibly with an alignment pin?) I don't have the AMS and would like to print this.
4
Reply
Boosted
That's what I'm waiting for as well.
1
Reply
please do it as a kit
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Came out wonderful! Supports were a little crazy to get off, but didn't mind it because you won't really see the bottom!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Really good print!
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Fine, but I spent hours painstakingly removing the supports. Fortunately, I used PLA supports. Even so, it was still difficult to remove them
Show original
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
Support Issue:Unfortunately, it prints very poorly, with far too much support and the quality is not particularly good either.
The designer has replied
Show original
0
Reply
Thank you for your feedback! I'm sorry to hear the print didn't turn out as expected. Currently, there is no solution for floating surface without using support. However, to help improve the quality, try rotating the model 270 degrees on the print bed, this should reduce the amount of support material required and improve the overall print finish. Do note that this orientation may result in more filament changes (quite a lot more), as the vertical alignment affects AMS efficiency. Also, using an opaque white filament can help prevent color bleeding! (I recommend PLA Matte White)
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.