The very famous connect four in a row board game but with deadpool and wolverine.

this is one of my favorite games and designs while featuring an overengineering lock mechanism.

just imagine that the lock mechanism took more to design than the whole project that wasnt so easy.

I used fusion for this.

you can find the stl files in the classic version of the game here:

connect 4 four in a row classic version portable

i kept the dimensions so that you can print it even in the a1 mini.

Total dimensions:

• 168mmx115mm the base case
• 30mm height closed and 125mm height when playing

There is a very useful lock mechanism for the lid.

The springs are in relax strength always. the only moment it works is when you slide the lid. when you slide the lid till its closed there are holes on it that the springs "park inside". there isn't constant load and if it is it will be very little depend on how calibrated is the machine. mine isn't so calibrated and still the springs park inside the holes of the lid just fine without load.

Totally 3d printed even the springs for the lock mechanism.

here you can see the test:

There will be other version also so if you like this don't forget to follow so to know when other version will be up.

simple version already ready and up! 

https://makerworld.com/en/models/751115

There are 5 plates.

• first plate has the deadpool tokens and 2 red springs for the lock mechanism
• second plate has the wolverine tokens and 2 red springs for the lock mechanism
• third and fourth plates have the 2 parts for the lid
• fifth plate has the main case.

Assembly instructions.

• print lid a and lid b. Glue them together. i used super instant glue and let it rest it for a while with a weight on it.
• install the 4 springs on their base. a drop of glue will hold them in place but maybe you will not need it at all. If its really tight please push it from the base with a screw or something so not to stress too much the springs.
• Play with passion and enjoy
• follow , like, boost :)