Sanding disc holder organiser 125 and 150mm by Scruminochi

Scruminochi

Tools>Organizers

Print Profile(4)

All

X1 Carbon

P1S

P1P

X1E

For 125mm discs

Designer

7.1 h

1 plate

4.8(28)

For 125mm discs with customisable numbers

Designer

7.2 h

1 plate

4.3(3)

For 150mm discs

Designer

6.8 h

1 plate

4.3(4)

For 150mm discs with custom numbers

Designer

6.9 h

1 plate

5.0(1)

Open in Bambu Studio

Boost

553

1414

792

295

Released

Description

Sanding disc organiser for 125mm and 150mm discs

Print profile 1 is for 125mm sanding discs

Print profile 2 is for 150mm sanding discs

30mm space for each grit: 40, 60, 80, 120, 180, 240, 320, 400.

It uses 144 grams of material with PLA and takes about 7 hours to print.

Print orientation allows one change of filament at the end for the letters to avoid material waste.

The long legs do wobble a bit towards the top while printing but it's still usable.

Please make sure your bed is clean before starting to avoid any heat bed adhesion issues.

When fixing to a wall, please be careful to not overtighten the screws to avoid cracking.

Comment & Rating (68)

@user_242221349

I did a split in bambulab and made it possible to print in two parts on a A1 mini Hope thats ok

The designer has replied

@Scruminochi

Amazing

@efon105

Print Profile

For 125mm discs with customisable numbers

Cery useful

The designer has replied

@Scruminochi

Looks good. Glad it's useful for you

@user_2241690438

Boosted

Great design with a reasonable amount of filament and very useful. Before I printed this my sanding disk were all very the place, now no problem finding them. Thank you!

The designer has replied

@Scruminochi

Looks great, I'm glad it's useful. The model can always be made much stronger but I usually don't like to waste filament so I try to make them just strong enough to be functional

@k3ldar

Print Profile

For 125mm discs

Nice design, will defo be useful. I printed with 0.6mm nozzle which may have a bit silly as the print seems to minimize filament usage. but still happy with it as it's a good design 😉

@gerritd

Print Profile

For 125mm discs

excellent. This is one of my favourite prints. worked great

@jordanpatten

Turned out pretty well. Printed using black Bambu PETG HF on the A1. couple small issues but totally usable and functional. Love how the grit numbers are in a different colour. Was easy to do with an AMS. Thanks for sharing design! Going to print a couple for Christmas gifts.

@DarthTaber

Print Profile

For 125mm discs

Walls are a little thin so you have to be careful not to break them. I printed this in matte black PLA but I'd use PET-G if I had to do it again just to give it a little more strength. All in all, it does exactly what I need it to do, and looks good too! Thank you!

@Scuba_Steve85

Print Profile

For 150mm discs with custom numbers

@user_3678266166

Print Profile

For 150mm discs

Some parts were so thin that they wouldn't adhere

The designer has replied

@Scruminochi

Please make sure your bed is clean before starting to avoid any heat bed adhesion issues. I've even added this in the description.

@user_3678266166

Replying to @Scruminochi :

I cleaned the bed first. The issue may have been the filament that I used - not sure. Either way, thank you for your work on this project. It looks like it worked great for other people.

@Scruminochi

Replying to @user_3678266166 :

I've had issues before especially with lower priced filaments. In most of the cases it was down to adjusting the default settings.

@frenthend

hello, can u do for 150mm discs pls ?

The designer has replied

@Scruminochi

Hi, thanks for reaching out. I can do one for 150mm, of course. Give me a few days and I'll let you know when I upload it. are there any other changes you would need?

@frenthend

Replying to @Scruminochi :

all good, just need 150mm, thank you very much, for your work, very helpfully

(Edited)