Bonsai Tree by Grafitomi

Grafitomi

Household>Decor

Print Profile(8)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 2 walls mixed infills

Designer

10.8 h

4 plates

4.9(293)

Foliage only 0.2mm layer, 0 walls, 22% infill

Designer

2.2 h

1 plate

4.8(16)

0.6mm nozzle, 0.18mm layer, 2 walls, 10% infill

Designer

9.2 h

4 plates

5.0(9)

PLA - 0.2mm layer, 2 walls, variable infill

8.1 h

4 plates

4.9(17)

Click to see more

Open in Bambu Studio

Boost

2059

3711

649

529

3.5 k

1.7 k

Released

Description

A friend of mine was doing a project where he needed a bonsai tree. I experimented with infill only foliage and it turned out so good I decided to release the model to the public.

If you like this print, check out the Sci-Fi Container made for exclusively for this little tree.

Comment & Rating (649)

@jimbustos

Boosted

Print Profile

0.2mm layer, 2 walls mixed infills

Stunning! Thank you for sharing your design!

The designer has replied

@Grafitomi

wow! first painted one! 😍 Nice work!

@jimbustos

Boosted

Replying to @Grafitomi :

Thanks! Everyone who's seen it wants one. I'm going to print a larger one too. I'll post the results when finished.

@Grafitomi

Replying to @jimbustos :

:) glad to hear this

@fefc

Boosted

Excellent design. I've made some negative parts to be able to put neopixel leds in, wires go inside the tree and an arduino board in the pot :). I don't think your licence allows for sharing files but if the designer is intrested let me know.

(Edited)

The designer has replied

@Grafitomi

Wow! Awesome I love it! :) Maybe in when the exclusive period is over I will set the license to allow remixes.

@JB.3D

Boosted

Love that. We need the files for it later!!!!

@N9raver81

Wow these colors came out great 😊

@user_4001024473

Print Profile

0.2mm layer, 2 walls mixed infills

I find it absolutely stunning with these colors.

The designer has replied

Show original

@Grafitomi

Beautiful combination! 😍🙏🏻🙏🏻

@RCO_PDM

Fantastic colors...:-) Which manufacturer is the brown filament?

@user_4001024473

Replying to @RCO_PDM :

PolyTerra PLA Wood

@gamebae

Boosted

Print Profile

0.2mm layer, 2 walls mixed infills

Amazing model. After printing it twice I'd say that the support design & removal could be changed. Support will leave marks on the model, which is visible because it's on the upper side of the "leaves".

The designer has replied

@Grafitomi

Thanks! Yeah, I know. Have you seen the improved separate profile just for the leaves?

@gamebae

Boosted

Replying to @Grafitomi :

Oh no I haven't seen it. I'll make sure to print that when I print the model again!

@Grafitomi

Replying to @gamebae :

A bit modified supports and the contact z height is set to .3 I was able to remove supports with one hand while holding the phone (making video)

@Rytis1986

Boosted

Print Profile

0.6mm nozzle, 0.18mm layer, 2 walls, 10% infill

The designer has replied

@Grafitomi

OMG 😍 Beautiful!

@dr3amcast3r

Stunning!

@Brutu583

Boosted

Print Profile

0.2mm layer, 2 walls mixed infills

awesome design. decided to use Sakura pink for the leaves

The designer has replied

@Grafitomi

Perfect filament for the job!

@MrSalum

Boosted

This design is amazing! It's one of the most beautiful 3D prints I've ever made. Thank you for sharing this project. I'm already printing the second one!

The designer has replied

@Grafitomi

Thanks for the kind words! I hope you will love the second one too. 🙏🏻

@Grafitomi

Wow just noticed the little addon you made! 🤩👌🏻

@user_3326003043

Boosted

Great print!

The designer has replied

@Grafitomi

Very elegant! 🤩👌🏻

@user_3326003043

Boosted

thanks!

@McAbbe

Boosted

Print Profile

0.2mm layer, 2 walls mixed infills

I give it 5 stars because it's a really cool model, with the tree printing without supports, and the rendering is impressive. On the other hand, it's not perfect, the supports can be difficult to remove for the foliage. I'm trying to print them vertically, I think we can do better that way.

The designer has replied

Show original

@Grafitomi

Thanks! Yeah I know, unfortunately the foliage needs the supports. And how hard is to remove depends on some factors. Different PLAs give various results. For example users using silk PLAs reported awesome results. But you are right, there may be a better way.

@McAbbe

Boosted

Replying to @Grafitomi :

Yes there is. Here is an example that i tested, it works, just use supports "on plate only", and increase the brim to 10 perimeters. Also as it is fragile (infill only), it is better to print only 1 part at a time, otherwise i had one failure out of 2 parts when i printed 2 at once. For this you have to turn manually the part, so it stands vertically, as there is no surface below to use the automatic feature. It results on a nice surface, on the uppon side, the one that is visible.

(Edited)

@Grafitomi

Replying to @McAbbe :

You can publish working profiles if you want. You will get points for them. :)

@CatWhisker

Boosted

Print Profile

0.2mm layer, 2 walls mixed infills

love this print. turned out great. Thank you and giving you a boost too!

The designer has replied

@Grafitomi

I love to see those little trees coming to life in all different filaments. :) Thanks for sharing, and the boost!! Much appreciated!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(8)

Description

Comment & Rating (649)

License

Related Models

cat tree wall art

Knitted Valentine Heart Tree - Supportless!

Of The Trees Charm

Tree Frog