Gridfinity 4U Tall Bins by Andre PMakerWorld: Download Free 3D Models

Andre P

Tools>Organizers

IP Report

Print Profile(12)

All

A1 mini

H2D

X1 Carbon

P1S

P1P

X1E

1x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole - A1 Mini

Designer

5.6 h

1 plate

5.0(4)

1x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole

Designer

7.6 h

1 plate

4.5(2)

2x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole

Designer

4.4 h

1 plate

5.0(3)

2x2 Bins, 0.6mm Nozzle, 6.2mm magnet hole

Designer

6 h

1 plate

Click to see more

Open in Bambu Studio

Boost

285

115

Released

Description

I tried to generate all combinations i could fit on my Bambu.

Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle.

Scoop

A Scoop is the rounded ramp inside the bins. The position of the scoop varies by model, and you should have an option of scoop position for every size. Because of that, the 1x2 bin is different from the 2x1 bin!

Enhancements:

These are the perfect bins to use in combination with Labels and Rugged Boxes:

Gridfinity Labels

Boost Me (for free)

If you like this model, boost me! It's free and helps me create more useful content. Thanks!

Comment & Rating (14)

@feuerbowle

Print Profile

1x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole - A1 Mini

First testprint went really well. Now i can start mass producing. 😄 Thanks for your great work 🙏

@user_1303198959

Print Profile

2x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole

they work nicely 6x2 magnet rounds fit snug. with some glue for some holes

@BrassLeaves

Print Profile

1x1 Bins, 0.6mm Nozzle, 6.2mm magnet hole

Results with a 0.6mm are tolerable. For a storage bin it works, though I'd suggest making sure temps and speeds are correct. Had a bit of slop in some places.

The profile uploader has replied

@Andrepadua

I suppose I could adjust speed a bit, but temps will be in your material profile - as will flow rate, which also impacts speed. Do you mind sharing a pic of your issue and which filament you used? Thanks!

@BrassLeaves

Replying to @Andrepadua :

Oh, pardon was unclear on my part. Was suggesting people check settings to match their printer needs. Running a X1C and gray PLA from Bambu. Didn't proactively dry the filament, it had just come out of the packing. Main issue were layering, seam, and minor voids.

@Andrepadua

Replying to @BrassLeaves :

You’re right. That doesn’t look too good. I printed with Bambu PLA (blue-grey) and with Kingroon grey - and both came out better than that (also on an x1c). Very odd.