Laptop Wall Mount by patricksnitjer01

patricksnitjer01

Household>Office

Print Profile(3)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Adjusted hole position, 3 inch hole spacing, 25mm width

Designer

2.3 h

1 plate

4.5(2)

0.2mm layer, 2 walls, 10% infill, width for laptop 24 mm

Designer

2.2 h

1 plate

3.5(2)

Adjusted hole position, Ikea Skadis compatible, 25mm width

Designer

2.3 h

1 plate

Open in Bambu Studio

Boost

181

Released

Description

A stylish, practical wall mount bracket for your laptop. I designed this because existing laptop brackets allowed the laptop to move sideways, making plugging in cables a two-hand job. Underneath the brackets are holes for brass inserts (size metric M3) to attach accessories like a charging brick. The inner width of the brackets is 24 mm (or 0.94 inch), but the model is easily adjusted with the attached solidworks part. Sizes 20 mm and 30 mm are available to download as .step and .3mf files. It is better to oversize than undersize.

The brackets can be mounted using double sided tape (like I did), or holes with standard peg-board dimensions (¼ inch holes with 4 inch spacing).

Comment & Rating (8)

@Kurzy_Magus

Boosted

Really great stuff! Mounted with Command velcro stripes and used it to store my lenovo t14. Set BIOS to turn PC on on AC connect and now I have a lot of space free space :)

@Driver_D

Boosted

Print Profile

0.2mm layer, 2 walls, 10% infill, width for laptop 24 mm

they printed Great. but I had to drill a hole in the front to install the bottom screw. overall sturdy, attractive and well done. having a hole in the front would help though.

The designer has replied

@patricksnitjer0

Thank you for the review! if the holes bother you, I have an updated print profile where I made the holes more accessible. Enjoy your print!

@valgart

Print Profile

0.2mm layer, 2 walls, 10% infill, width for laptop 24 mm

Prints fine but i am unable to get to the screw holes

The designer has replied

@patricksnitjer0

Thank you for the comment! I imagined using an angled hex key for it. But seeing that maybe not everyone may have that type of screw around, I may adjust the model for this. Edit: new print profiles have been added. They are now compatible with 3-inch spaced or 80 mm spaced (Ikea Skadis compatbile) holes of size M5. I hope that these will work for you!

(Edited)