AMS lite spool removal tool V2 by BigJon1378

BigJon1378

3D Printer>3D Printer Accessories

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.2mm layer, 3 walls, 10% infill

Designer

1.8 h

1 plate

4.9(180)

0.6mm nozzle, 0.3mm layer, 3 walls, 10% infill

1.2 h

1 plate

4.0(4)

Open in Bambu Studio

Boost

273

650

375

194

1.1 k

854

Released

Description

This is the second version of the spool tool i made to be used with the AMS lite and the Ultimate Filament Spool Enclosure 封箱 for AMS Lite.

You can now print a storage mount for this tool HERE.

This version has been fully redesigned from the original and the outer diameter is slightly larger as well as the inside of the tool the shape has been redesigned to increase strength also change the shape and strength of the handle as well as text on the bottom to identify what the tool is for.

my tool was printed on my A1 with bambu lab PLA basic black and bambu lab PLA basic white

Thank you all for your continued support!

buymeacoffee.com/bigjon1378

note: this is not a duplicate model, this part was drawn from scratch in order to print properly with the change in shape and dimensions, this is my own original design and not a copy, and is NOT it available anywhere else other than maker world, thank you.

Bill of Materials

Bambu Filaments

Jade White

A00-W1-1.75-1000-SPLFREE

19.99 USD

× 1

Black

A00-K0-1.75-1000-SPLFREE

19.99 USD

× 1

Buy Now

Download BOM

Comment & Rating (375)

@Dennis7

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Top! My friend if you want check out my designs! 😉

@BigJon1378

thank you for the feedback, I'll be sure to check your designs out ASAP.

@Dennis7

Boosted

😊

@BigJon1378

Replying to @Dennis7 :

thank you

@redstoner89

Print Profile

0.2mm layer, 3 walls, 10% infill

rough bottom Side after removing Supports

@BigJon1378

you should give the V3 a print. it prints without supports.

@BigJon1378

also there's the gridfinity edition which is by far the smoothest one so far.

@redstoner89

Replying to @BigJon1378 :

could you send me the link? can't seem to find it. also, I noticed this one doesn't quite fit the elegoo spools, would the V3 be better than the Slim S.R.T. V2 for that? thanks!

@tiamak3

my son found another use for this awesome tool! Aaaarrrggghhh 😂🏴‍☠️

(Edited)

The designer has replied

@BigJon1378

haha my kids do the same thing! great picture! I've got like 12 of them laying around the house from all the prototyping. appreciate the feedback 😃

@Serpandrew

Print Profile

0.2mm layer, 3 walls, 10% infill

useful tool and printed ok. I suggest re designing it so the inside is curved or angled rather than flat. this would allow it to be flipped for printing without any support requirement.

@BigJon1378

I have considered this. and would love to do exactly that. but I literally just learned to use CAD so as I progress so will my models. but this is a very good suggestion and I will look into it. I try my best to make things with as little support as possible.

@BigJon1378

there is now a support free version available

@LP_26

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Great solution, makes removal much easier.

@BigJon1378

awesome! glad you're enjoying it thank you for the support and words of encouragement.

@lazzapao62

Boosted

Nice model! Very useful.

The designer has replied

@BigJon1378

thank you for the feedback and the boost much appreciated 🙂

@firestarter451

Print Profile

0.2mm layer, 3 walls, 10% infill

Love it, very useful

@BigJon1378

fantastic thank you 😄

@endlessoul

Print Profile

0.2mm layer, 3 walls, 10% infill

My first print where it just lifted right off of the supports. Sturdy, useful tool. Best on bambu spools. Overture spools are a little cozy.

@BigJon1378

very nice, I have a few other versions you might like..check them out. and thank you for the feedback much appreciated

@Chocopompom

Print Profile

0.2mm layer, 3 walls, 10% infill

It's good !

@BigJon1378

fantastic thank you 😊

@user_257103181

Boosted

Print Profile

0.2mm layer, 3 walls, 10% infill

Significantly easier to remove Excellent print

Show original

@BigJon1378

thank you 😊

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(2)

Description

Bill of Materials

Comment & Rating (375)

License

Related Models

Gurio instrument

Spool Holder

Cardboard Spools pen brush tool holder recycling

Connector Set - Cardboard Spools