Z-axis lower bearing cover for Bambu Lab X1 / P1 by Piotr_C

Piotr_C

3D Printer>3D Printer Parts

IP Report

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

H2D

0.12mm layer, 4 walls, 100% infill

Designer

23 min

1 plate

4.8(454)

Open in Bambu Studio

Boost

794

1770

985

269

3.5 k

2.7 k

Released

Description

If you like my project, give me 👍, it will make it easier to reach others 🙂

Boost Me (for free)

Each project takes hours or days of design and testing. There are also a few or a dozen test prints to make sure everything fits as best as possible. If you like my project, appreciate my work and want new projects of this type to be created in the future, support me so that I will be motivated to continue working 😉
Thank you for current and future boost 😉

Description:

I designed these covers because of dust, bits of filament and other things constantly sticking to the lower bearing.

The covers can be easily removed or lifted to lubricate the Z axis screw.

I added delicate notches at the bottom to make it easier to pry.

The cover does not interfere with the printer's operation in any way and does not limit it in any way.

Installation:

STEP 1:

Place the first part in its place.

STEP 2:

Slide the second part from above onto the first one along the Z-axis screw.

There is no need to use force, everything fits the ideal.

The screw at the back causes minor problems due to the small amount of space for the fingers, but just a moment of patience and you can put it on.

Please see my NEW model of the Z axis table cover, which stylistically matches this one:

Good luck and I invite you to test my other projects ;)

https://makerworld.com/en/@Piotrek.C

Comment & Rating (985)

@marleym

Print Profile

0.12mm layer, 4 walls, 100% infill

I love this, it was a quick and easy print but it’s really hard to clip the back one in place.

@Piotrek.C

I agree, it's hard to put them on from the back, but it's possible ;) Thanks for your comment and rating :)

@marleym

Replying to @Piotrek.C :

How have you gotten it on the back? I would love some help. You’re welcome. I love giving feedback on models.

@Piotrek.C

Replying to @marleym :

It took me a while because I have thick fingers ;) But I finally managed to do it. It would probably be easier for a woman, they have smaller hands :)

@lukasgustav

Print Profile

0.12mm layer, 4 walls, 100% infill

the counterparts fit together nicely. unfortunately the covers don’t really fit inbetween the two bolts that hold the z-rod bottom.

@Piotrek.C

Hi. Could you check if your dimensions are the same as mine in the photos?? To me it looks as if you had screw heads with a larger diameter than mine...

(Edited)

@lukasgustav

Replying to @Piotrek.C :

hey, thanks for getting back! measures seem to be identical besides minor measuring error

@Piotrek.C

Replying to @lukasgustav :

I don't know why it doesn't fit... Maybe it's the filament, some shrink more than others...🧐

@the_parabol_ink

Print Profile

0.12mm layer, 4 walls, 100% infill

They fit perfectly. Thanks for sharing 👍

@Piotrek.C

Thanks

@StreamBo

Boosted

Print Profile

0.12mm layer, 4 walls, 100% infill

Everything is great :)

Show original

@Piotrek.C

Thanks for the comment and rating 😉

@StreamBo

Boosted

Replying to @Piotrek.C :

np :)

@user_3547751389

Print Profile

0.12mm layer, 4 walls, 100% infill

print failed, not sure why.

@Piotrek.C

Wash and degrease the bed before printing, it helps with adhesion. Alternatively, change the filament, because if it's PLA, it's of low quality, if it's so stringy, you calibrated it incorrectly or you didn't calibrate it at all. If you still have problems, let me know and I will try to help 😉 Besides, it's not the design's fault, so I don't understand why only 1 star... If you have any problems, write, everyone will surely try to help you, and don't give such a low rating right away.

(Edited)

@user_3547751389

printer is fresh out of the box. I guess Bambu labs themselves can take the hit on that one. it was my second ever print

@refflux

Print Profile

0.12mm layer, 4 walls, 100% infill

As You can see, there is some dirt around, and this cap protects it from getting into the bearing.

@Piotrek.C

👍Thanks 😉

@HusYoo

Print Profile

0.12mm layer, 4 walls, 100% infill

used petg, fits great

@Piotrek.C

Thanks

@tPlum

Print Profile

0.12mm layer, 4 walls, 100% infill

passt perfekt

@Piotrek.C

Thanks

@Mymaxdom

Print Profile

0.12mm layer, 4 walls, 100% infill

Perfekt vielen Dank

@Piotrek.C

Thanks

@OndraDvoulety

Print Profile

0.12mm layer, 4 walls, 100% infill

This one works very well. Happy about this print.

@Piotrek.C

Thanks

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.