Iris Box - MW skin by StatusSymbol

StatusSymbol

Tools>Organizers

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 2 walls, 15% infill

Designer

4.1 h

2 plates

4.8(62)

All parts on one plate (not a1mini compatible)

3.5 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

447

987

165

950

485

Released

Description

Other versions available:

------------------------------------------------------------------------------------------------

A new box with a mechanical lock and iris, available exclusively on MakerWorld.

The project was created using Rhino 8 and printed on a Bambulab A1 Mini with Sunlu PLA filament at a resolution of 0.15mm/layer.

Comment & Rating (85)

@DougBurton1969

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

There is a flaw in the body of the model but the mechanical is perfect

@user_278442353

I noticed the same thing unnecessary color change. almost ruined it for me...🤷‍♂️

@BinTC

I just noticed the same thing, mid print, after I heard it doing a wipe! Fortunately it's grabbed a natural uncolored filament. We'll see how it turns out.

@BinTC

Replying to @BinTC :

Open it in Bambu Studio, prompt to fix the print, then a message will pop up that custom coloring was removed. Not sure how it got in there, that should fix it for you.

@Schondras

Boosted

Fun. Remove the erroneous second color from the cup section and use a smooth plate for this iris parts. A1 mini 0.16 High Quality for the cup, 0.12 HQ for the iris bits.

@DougBurton1969

Boosted

Hands Down the smoothest Iris mechanism I have printed yet.

@DougBurton1969

Boosted

I had this area that was messed up, I thought my printer did it, i went back to the slicer and found that it is a flaw in the model. There are spots of the second color mixed in a few spots of the model, is there a reason for this? I am assuming it is a flaw.

@Crissmai

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

pretty cool. couldnt get the handle to screw in under so i just didnt lol. looks great

@brutalfeit

Boosted

It turned out perfectly. Very beautiful finishes. If you allow me to suggest, it would be good if the gear was printed with the small knob and it was in one piece. Regardless of that, it is magnificent. Thank you very much for the contribution.

Show original

@wrn4e

Print Profile

0.2mm layer, 2 walls, 15% infill

Good and easy print, nice design, thanks

@yulia.2024

The print is exceptionally smooth

Show original

@kaiamomo

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Very nice

@YtyMcSkeetertin

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

There is a slicing flaw that created gaps on the vertical lines of the body. When i load it into orca slicer, there is painting on the iris components which is a bit of a pain to remove individually.

@YtyMcSkeetertin

Boosted

Nice little jar. When it sliced up there were gaps on the vertical lines for some strange reason.

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.