The Swirl Lamp by SoDR

SoDR

Household>Decor

IP Report

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

H2D

The Shades

Designer

3.9 h

2 plates

5.0(42)

Base, Foot and socketholders

Designer

2.8 h

4 plates

5.0(38)

0.2mm layer, 6 walls, 15% infill

55 min

1 plate

Open in Bambu Studio

Boost

489

905

152

122

1.2 k

474

Released

Description

The Swörl lamp

Build your own!

Go nuts with the colours!

18x18x26 (DxWxH)

Designed for either a e14 or e27 socketholder with retaning-collars.

¤¤¤ CAUTION! ALWAYS USE LED-LIGHTS!! ¤¤¤

Happy printing!

Comment & Rating (152)

@user_2526733302

Boosted

Print Profile

The Shades

I'm in love with this lamp!! Was a bit of a struggle at first to find the best print settings for this design with translucent PETG, but it came out beautiful. Modified it so it would fit the Bambu light puck. Sorry for the photo spam, but I just had to show it off! Thank you so much for this design!!

@SoDR

Love the photo spam! :D looks awesome!! And thx for the boost!

@user_2469815682

Hi Dear ,ı love so much this model but ı have a problem when ı print it.ı try all combination (temperature,speed,layer height etc) but every time same problem,please help me,printer;flsun t1 0.4 nozlle and ı use flsunslicer.

The designer has replied

@SoDR

try 0.8 layer width and 0.28 layer height. Should resolve the problem

@user_2469815682

Replying to @SoDR :

thank you so much for your tıme and for quick response you are very kind.but ıf ı try 0.8 layer width with 0.4 nozzle ,will there be any problem?because ı just have 0.4 nozzle.

@SoDR

no not att all. that shade is designed to be printed vithet a 0.4mm nozzle at 0.28mm layerheight and 0.8mm layer width. I have used those peremiters many times

@Tche

Boosted

Hey! I love your model and the way you made everything click together. I had a slight preference for another creators lamp shade, but i modified the files to make it fit on your base. I've also changed the socketholder to make it more snug on an e26 ones i bought. The other thing I noticed, the version i printed in wood filament was much more snug on the bottom. The PLA basic version slips off whenever i pick up the lamp. So I'm currently printing a version where the interior is slightly larger and doesn't fall off

The designer has replied

@SoDR

Wow, cool mod! i am glad you liked the lamp.... or the base and fastner design anyway ;) The wierd thing is that when i printed the base and bottom part the fitment was almost too snug. But i left it snug because I would rather have that, than a bottom that falls when I move the lamp. Did you mix filaments when printing? like base in PLA and the bottom in Wood PLA? Thx for the boost btw!

(Edited)

@Tche

Boosted

Replying to @SoDR :

No, I didn't mix filaments ! I guess the wood filament is slightly thicker. I finished my print on that bottom part. I made the interior 1% larger and it is SO snug haha. I used Basic Bambu PLA. Also, I modified the opening for the slit on the base. I made the opening smaller, because I wanted the lamp shade to be a little tighter when connected. I think it helps the lamp shade to stay in place (you know in case you wanted to pick it up and start waving it around, haha).

@user_2042224656

@Tche is it possible for you to provide the modified lampshade with the appropriate thread for the base shown here? If not, could you direct me to where I might find the design?

Show original

@ADCreativemood0

Boosted

Print Profile

Base, Foot and socketholders

execelente

@SoDR

Awsome color choise!

@ADCreativemood0

Boosted

Replying to @SoDR :

Gracias

@user_3532103453

Boosted

Hello, the colors are superb What filaments did you use? Thank you very much

Show original

@user_3532103453

Boosted

I absolutely loved this print It is magnificent For the lighting I preferred this type of LED from Bambu Lab which I simply placed on the surface and allows me to change the color with the remote control

The designer has replied

Show original

@SoDR

looks awesome! Lucky you managed to fit the rgb puck inside the lamp :) Thx for the boost!

@user_4084289917

which filament did u use? 🥰

@user_3532103453

Boosted

Replying to @user_4084289917 :

Hello, I used Kexcelled's Chelsea red matte PLA and Giantarm's transparent PLA Have a great day

Show original

@anosora

Boosted

Print Profile

The Shades

lovely lamp, looks great. Shame the bottom parts don’t snap or screw together. makes picking it up a little annoying

@SoDR

Yes, i have heard similar problems from others. Will upload a new bottom-part with tighter tolerances shortly. Thank you for the boost and feedback!

@ride27

Boosted

Print Profile

The Shades

@SoDR

Cool solution! what lightsource are you using? Thx for the boost!

@ride27

Boosted

Replying to @SoDR :

I use the Bambu Kit 001; for this, I designed a base myself

Show original

@anosora

Boosted

Replying to @ride27 :

looks awesome, could you upload this base?

(Edited)

@sunhsiv

Boosted

Print Profile

Base, Foot and socketholders

Beautiful design amd came out well. Lamp shade printed with Jayo White PLA Base - Jayo Black PLA Base bottom - Bambulab Bronze PLA Added some moulded air dry clay to the bottom for extra weight and stability

@SoDR

Smart idea with the clay! And thx for the boost!

@pitbullmaster

Hello, where can I find the lamp base

Show original

@user_869508521

Boosted

Love the lamp design. Can anyone help me with the settings…the shade does not print the top part with a clean surface. I already tried to minimize speed and tried a few temperature settings. Has anyone a few tipps? I use the a1 printer.

The designer has replied

@SoDR

looks like the printer can't cope with the overhang and the filament dont stick to the layer below. Did you alter the layer height settings? if so, revert back to 0.28(i think) that was in the print profile. If not, try and print with a slightly lower printheight, 0.24 or 0.2. Also split the model and do a test print from the height when the problems start to show just to make sure it works

(Edited)

@user_869508521

Boosted

Replying to @SoDR :

thanks. I already tried a layer height of 0.20. I just keep ok trying. 😁

@MariePierre

Boosted

Print Profile

The Shades

I adore it

Show original

@SoDR

oooo i like that shade! what filament is it

@MariePierre

Boosted

Replying to @SoDR :

Matte black desert tan Bambu

Show original

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License

Related Models

Print Profile(3)

Description

Comment & Rating (152)

License

Related Models

Lamp Shade - 3.2

Kumiko Style Japanese Lantern/Lamp

Modern LED Lamp

umber · lamp