Hippo Planter by gary.sinkowitz

gary.sinkowitz

Household>Decor

Print Profile(2)

All

P1P

P1S

X1 Carbon

X1E

A1 mini

No Brim - 0.2mm layer, 5 walls, 10% infill

Designer

5.1 h

1 plate

3.0(1)

Brim-10mm-0.2mm layer, 5 walls, 10% infill

Designer

5.1 h

1 plate

Open in Bambu Studio

Boost

Released

Description

Hippo Planter with a couple of print profiles.

Non-drainage designs are provided.

The planters are 84 mm height x 165 length x 86 width.

Supports are required and challenging to keep the belly manageable.

2 print profiles included using the same slicer supports settings,

one has a 10 mm brim and one doesn't.

The brim is not really needed but if more traction is required, it is there.

The slicer settings:

.20 mm Standard

Filament: Sunlu Meta Cream White

Infill % - 10 , Gyroid
Wall Loops - 5
Bottom Shell - 5
Seam: Aligned

The settings for supports:

Tree(Manual)

Angle: 25

Build Plate Only

Remove Overhangs

In order to make supports easier to remove, the filament temperature was changed from 220-220 to 220-205.

Then the other settings:

Support wall loops: 1

Top Z distance: 3.5-4.0

Bottom Z: ,16

Base Pattern: Hollow

Base pattern Spacing: 3

Top Interface layers: 1

Bottom Interface layers: 1

Top Interface spacing: 0.8

Comment & Rating (1)

@phamboo

Print Profile

No Brim - 0.2mm layer, 5 walls, 10% infill

thank you for your design and time .... I wish I can give more stars to ALL THE CREATORS AND UPLOADERS for all your efforts and creativity .... thank you 1000x

No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.