Fox 3 Chinese Mythical Animal Model Sculpture Craft Ornament

Copyright Claim

Fox 3 Chinese Mythical Animal Model Sculpture Craft Ornament

Boost
608
1016
38

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
1.9 h
1 plate
4.6(17)

80% scaled - 0.28mm layer, 2 walls, 6% Gyroid infill
80% scaled - 0.28mm layer, 2 walls, 6% Gyroid infill
40 min
1 plate
4.7(3)

Open in Bambu Studio
Boost
608
1016
38
42
636
290
Released

Description

Content has been automatically translated.
Show original

Chinese Mythical Fox 3 Sculpture Art Ornament

Boost Me (for free)

Comment & Rating (38)

Please fill in your opinion
(0/5000)

Print Profile
80% scaled - 0.28mm layer, 2 walls, 6% Gyroid infill
I really don't like the use of brim when can be avoided. I guess since the model doesn't completely touch the bed, this printer profile opted to add them. I would have rather either sink the model slightly till you have a good flat bottom (you are not losing anything important) or just a slight cut at the base. Supports worked but maybe too thin. With this silk filament they barely make it.
0
Reply
I hate the same problem and cut with the plane in the slicer. worked fine 🤩
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
printed at 220mm tall. absolutely beautiful with PLA-HS from flashforge
0
Reply
how did you paint it?
The designer has replied
0
Reply
This one hasn't been painted, but some of my previous planters were painted with acrylic paint. They needed to be sanded, primed, and then painted with acrylic paint. If you are worried about chipping, some people apply a layer of varnish. Oil-based paint is not suitable for indoor use.
Show original
0
Reply
This can be painted with color pencils to create a gradient, or lightly colored with a makeup sponge.
Show original
0
Reply
Sleek, beautiful lines and elegant design
The designer has replied
1
Reply
:P
0
Reply
It looks like a 3D scan of a percaline figure, doesn't it?
1
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
good model, has a lot of stringing
0
Reply
the stringing issue is because of your wet filament/wrong retraction settings
0
Reply
are you printing these with resin?
The designer has replied
0
Reply
pla
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
bad detail
0
Reply
beautiful design! very elegant. printed perfectly - thank you!
0
Reply
perfect lines, very sensual design
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.