ATUVOS Magnetic - Housing, GPS Tracker, KeyFinder
ATUVOS Magnetic - Housing, GPS Tracker, KeyFinder
Print Profile(1)
Description
IMPORTANT: The design is very tight, the filament should be calibrated!
My brother-in-law needed an easy way to attach the GPS tracker to his trailers and tools that are parked outside (theft protection)
I therefore designed the housing, which is simply attached to the trailers and tools with a magnet (around 20 mm in diameter, at least 2 mm high).
I have provided a simple Ruthex melt-in thread (M3) in the housing. The cover is fastened with a washer and an M3x6 screw. I have made several models, magnet glued with either 2K adhesive or silicone.
Tracker: ATUVOS (Manufacturer / Amazon.de)
Boost Me (for free)
thank you very much!
Bill of Materials
- Neodym Magnet (Round D=20mm; H=2+mm) x 1
- M3 Washer (D=7mm; d=3,4mm) x 1
- Ruthex melt-in thread (M3) x 1
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)