I liked all the GPU brackets you can find on the internet, but I wanted one with an integrated tensioner so that once you have set it to the right height, you do not have to tighten it.
My adjustable GPU bracket is very easy to print (of course - No supports needed) and install. You just have to turn the wheel to set the right height (75-115mm).
If you need longer version, just let me know the lenght and I will add it. :)
The base stand is 30mm wide, but if you do not have room for it, you do not need to use it. (Like me, I do not have enough space between 2 HDDs)
Tightener wheel and main body are made with small lock pins and holes and it will prevent any rotation by vibration from you GPU. Set the correct heigth and it will lock the position.
The material for the print is up to you. If you have a large case or an open case, PLA should be fine, but if you have more than 55°C in the case, you should at least print it from PETG, which holds up to 70°C.
I used Bambu PLA Basic and Bambu PETG-HF filaments.
Boost Me (for free)
If you like it, you can support me with boost. It is free for you and it will help me a lot with a future projects :)
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (334)