Filament Spool Organizer
Filament Spool Organizer
Print Profile(1)
Description
Simple Expandable Filament Shelf.
You will also need roundwood rods with a diameter of 14mm from the hardware store.
I cut my shelf's 1m rods in the middle and installed a T-joint for stabilization.
The vertical rods at the top are 20cm long.
The horizontal ones are 10cm.
For a shelf about 1m long, you will need:
14mm roundwood (I paid about 2.30€ per meter at the hardware store.)
8x50cm
6x20cm
6X10cm
You can also glue the rods together. I haven't done that yet because I want to extend my shelf around the corner and maybe add another level.
If anyone has built it, I would appreciate pictures in the comments.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)