Hi,

If you are looking to create the same photo as per the cover photo visit my profile or use the links below:

The Yellow Duck is available here - https://makerworld.com/en/models/685512#profileId-614094

Two-part Christmas tree in the photo  - https://makerworld.com/en/models/723421#profileId-654464

The Christmas Presents in the photo - https://makerworld.com/en/models/710575#profileId-640967

Conic Modular Christmas tree in the photo - https://makerworld.com/en/models/723421#profileId-654464

Christmas gift box 10x10cm - https://makerworld.com/en/models/736472#profileId-668477

I'd like you to please follow the instructions I've included below for a better experience printing the Magnetic Christmas Duck.

The preselected profile will work best with the pause settings and magnet attachment, if a lower profile is selected the pause settings will have to be adjusted for the magnet to fit the slot.

1x round magnets will be required - size 6mm x 3mm

For this print, I used Orange, Black and White PLA.

Hit slice and make sure the pause command is active at layer 357 (just before the end of the print), this will pause the print and allow insertion of the magnet, and if all looks good hit the print button.

The Christmas duck is ready, time to print the hats and other accessories :)

Please provide feedback if happy with the print :)