Slim Wallet - without Cash drawer by MakerVerse Designs

MakerVerse Designs

Tools>Gadgets

Print Profile(5)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.15mm layer, 2 walls, 7% infill

Designer

1.7 h

1 plate

4.5(162)

PETG - 0.15mm layer, 2 walls, 7% infill

2.6 h

1 plate

4.3(14)

0.15mm layer, 3 walls, 100% infill

2.3 h

1 plate

4.3(6)

0.16 mm layer, 2 walls, 7% infill

1 h

1 plate

4.0(4)

Click to see more

Open in Bambu Studio

Boost

991

2319

214

150

3.2 k

2 k

Released

Description

A print-in-place slim wallet that offers space for 7 cards.

I have frequently been asked if I can make a version of my silm wallet v5 with cash drawer just for cards without space for cash. So here is a version without the drawer, which makes the wallet much thinner.

This is the Version of Slim Wallet (V5) WITHOUT DRAWER!

The version with a drawer for cash: https://makerworld.com/en/models/697590#profileId-626646

New Version: better diameters of the springs so they don´t break
cards snap in and they don´t fall out as before
I rounded the corners a bit to make it feel better
it´s only 11mm thick
It´s print in place
has place for up to 7 card

If you want to sell printed parts from my designs or want to get the .step files of my models you can become a member of my Patreon: https://www.patreon.com/c/makerversedesigns

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (214)

@3DBros

Boosted

Print Profile

0.15mm layer, 2 walls, 7% infill

Good print, very simple, but make sure to measure your cards beforehand. The first time I printed it, none of my cards fit inside, so I had to upscale the print by around 3%. I wander if this is a regional thing and our card sizes are different, but once I adjusted the size to match my cards everything worked perfectly. Sure, it's a bit finicky if you flick it too hard, but it's good overall for PLA printing.

@AshFrankArt

agreed! (from the UK)

@MothLuv

Print Profile

0.15mm layer, 2 walls, 7% infill

I printed it in PLA - worked beautifully. It's an effective design that does what it needs to. Only issue was that one of the little "paddles" already loosened and snapped off. It lasted about a week though.

@user_1354805407

I immediately snapped one of the paddles while fitting cards in. I'm using matte PLA so it might be part of the problem. Seems like a weak spot though

@user_1169629045

Print Profile

0.15mm layer, 2 walls, 7% infill

Flap broke immediately on the layer line. Maybe print it sideways. Edit: second flap also broke shortly after

@leoeedwards

Print Profile

0.15mm layer, 2 walls, 7% infill

there is a very distinct difference in glossyness at the bottom and it was quite difficult to get the cards out at first. but overall working and fun print!

@91von

use pla-support as a first layer interface to ha similar shine

@user_3885626471

Print Profile

PETG - 0.15mm layer, 2 walls, 7% infill

Not the fault of the profile, but I had adhesion issues with my bed. The only real problem is that I can't fit any of my cards in the wallet lol! My debit and DL won't go in. It's simply not wide enough

@jasonkunda

Print Profile

0.15mm layer, 2 walls, 7% infill

printed very nice. this is a great model

@Josiah.Halkias

Print Profile

0.15mm layer, 2 walls, 7% infill

very good, printed well, part moves well

@user_1742848572

Print Profile

0.15mm layer, 2 walls, 7% infill

pretty cool wallet. works ok, the 7th card gets stuck and doesn't come out some times

@chrisberlin

Print Profile

PETG - 0.15mm layer, 2 walls, 7% infill

Precise fit unsuccessful The noses on the left and right sides block the insertion

Show original

@dangerwaffle

Print Profile

0.15mm layer, 2 walls, 7% infill

looks great, feels great! printed with PLA, so it's a bit stiffer than I'd like, but holds the cards in great!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(5)

Description

Comment & Rating (214)

License

Related Models

Wallet/card holder with money clip

Without Cash Drawer: Slim Wallet - TPU

Set of Stylish Drawers

box with two drawers, stackable