A1 X axis dust cover by NYDER

NYDER

3D Printer>3D Printer Accessories

Print Profile(6)

All

0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

4.4(61)

0.2mm layer, 2 walls, 15% infill

Designer

2.4 h

1 plate

4.6(25)

0.2mm layer, 2 walls, 15% infill

Designer

2 h

1 plate

4.3(12)

repaired text, 0.2mm layer, 2 walls, 15% infill

2.3 h

1 plate

4.5(12)

Click to see more

Open in Bambu Studio

Boost

423

1231

130

1.4 k

620

Released

Description

X Axis Dust Cover

It's just simple dust cover that keeps your X axis linear rail clean.

Boost Me (for free)

If you like this model you can reward me by Boosting me. It helps me create more content like this for you 🎈🎇✨

How to print it?

Model doesn't require any supports !

Your A1 will handle that with no problem 🎈👾😎😁

If you don't trust your bed plate add inner brim

It keeps model in place but doesnt leave ugly edges 😁

You can print it in PLA, PETG etc but don't use TPU

-One color

-Two colors with stop for change

-Two colors with AMS

Don't forget to Boost Like and Comment.

Thanks for visiting this post and i wish you good prints only 😉🐱👤💥

Comment & Rating (130)

@Ryan7

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works great

The designer has replied

@NYDER

🖤

@user_4237019056

Boosted

printed ok did my own colours titan grey and logo in blue glow in the dark.

@amegria

Print Profile

0.2mm layer, 2 walls, 15% infill

Unfortunately, the left front side came off the plate after half printing time, so the print isn’t smooth on the left. This problem didn’t happen before with other prints, but I’ll have my eye on that.

The designer has replied

@NYDER

Did you read description?

@user_3356657806

Boosted

Print Profile

0.2mm layer, 2 walls, 15% infill

Works a charm! Didn't need the brim in the end.

@user_1398186687

Print Profile

repaired text, 0.2mm layer, 2 walls, 15% infill

nice little addition to the many upgrades for the A1. not really a necessary item unless printer is idle for days. i did experience a small issue with the last layer; (probably just a user-error) nothing i cannot live with and not worth reprinting.

@MammaDuck

Print Profile

0.2mm layer, 2 walls, 15% infill

had to raise the bed temp by 5° and put in an inner brim, but it came together after one spaghetti mess (luckily caught early)

@OD_Jake

Works very well

@miguelags93

Print Profile

0.2mm layer, 2 walls, 15% infill

funciona

@Lukis3DStudio

Print Profile

0.2mm layer, 2 walls, 15% infill

very nice print

@RPM37

Print Profile

0.2mm layer, 2 walls, 15% infill

looks great

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Toolhead Gear Dust Cover

idea Lab

Handle Collection

Libang

278

214

X- axis manual belt aligner for A1

user_4283999304

A1 Mini Dust cover X axis - Single part

Julian_J3D