小米蓝牙湿度计干燥盒 Drybox for AMS with Xiaomi hygrometer 2

小米蓝牙湿度计干燥盒 Drybox for AMS with Xiaomi hygrometer 2

Boost
426
953
188

Print Profile(4)

All
X1 Carbon
P1S
P1P
X1
X1E
A1

0.2mm layer, 2 walls, 20% infill
0.2mm layer, 2 walls, 20% infill
Designer
3.8 h
1 plate
4.8(110)

0.2mm layer, 2 walls, 20% infill
0.2mm layer, 2 walls, 20% infill
Designer
9.9 h
1 plate
4.9(15)

0.2mm layer, 3 walls, 20% infill
0.2mm layer, 3 walls, 20% infill
9.8 h
1 plate
5.0(7)

0.6mm nozzle, 0.3mm layer, 2 walls, 20% infill
0.6mm nozzle, 0.3mm layer, 2 walls, 20% infill
4.1 h
1 plate

Boost
426
953
188
9
3.3 k
731
Released

Description

应网友建议,此干燥盒在上一版基础上增加了可以容纳小米温湿度计2代的槽位,方便将小米温湿度计嵌入干燥盒中,使得AMS内部更整齐美观。湿度计放置槽位顶部设有斜坡,一方面防止湿度计传感器窗口被遮挡,另一方面也便于取放湿度计。你也可以尝试放置其他尺寸在43.5x43.5x13mm以内的方形湿度计。

另外,在上一版的设计中,slim版的干燥盒提手与料盘会发生干涉,在测试过程中我发现实际并不影响料盘转动,因此出于整体造型的统一就未做更改,但有网友在评论区指出了这个问题,因此还是重新修改一下提手形状以解决料盘干涉问题,模型文件随此次湿度计干燥盒一同发布。

*该干燥盒适配米家蓝牙温湿度计2

 

At the suggestion of netizens, this drybox has added a slot that can accommodate the Xiaomi hygrometer 2 on the basis of the previous version, which is convenient for embedding the Xiaomi hygrometer into the drybox, making the interior of AMS more neat and beautiful. There is a ramp at the top of the hygrometer placement slot, which prevents the hygrometer sensor window from being blocked on the one hand, and makes it easy to access the hygrometer on the other hand. You can also try placing other square hygrometers that are within 43.5x43.5x13mm.

Besides, in the design of the previous version, the handle of the slim drybox interferes with the placement of the spool, in the test process I found that it does not actually affect the rotation of the spools, so for the sake of the overall shape of the coordination, I didn`t fix it, but some netizens pointed out this problem in the comment area, so I modify the shape of the handle to solve the problem of tray interference, and the model file is released with the hygrometer version drybox.

*This drybox fits to the thermometer below: https://www.amazon.com/Thermometer-Hygrometer-Sensitivity-Temperature-Thermo-Hygrometer/dp/B0B1Q2MM29/ref=sr_1_1?dib=eyJ2IjoiMSJ9.qSpAH1WjLzq4TjE0Zb4CM3-PxL5tkHsQ9YveUjmLfgeNo0tNNtdeXWsD339-hy7dDc1KjKl5PfUGrxjDskK7mfDLrGMV5FRNqp57To9yOjA.PTv5DUUsMMMWYMFy2bLeZkJzdjaVMQ2F-_wFyIsuEV8&dib_tag=se&keywords=mijia+bluetooth+thermometer+2&qid=1712113750&sr=8-1

Comment & Rating (188)

Please fill in your opinion
(0/5000)

很棒的设计,一个问题,带温度计这个开口有卡位, 剩下左右这几个怎么都没有卡位
The designer has replied
0
Reply
没看明白,请问卡位指的是哪个位置?
0
Reply
Replying to @lloydliu :
就是盖子,🈶温度计那个直接就卡住盖子了,翻开也掉不了
0
Reply
Replying to @jarodlau :
噢,你用的是别人整理过的打印配置,他只保留了可以取下盖子的版本,https://makerworld.com/zh/models/67281#profileId-71174你到这里去打印,这里包含了带限位版本和可以取下盖子版本,因为两种各有优劣所以我都保留了,打开文件干燥盒主体内壁上有圆柱凸起的就是带限位的,对应的盖子侧边是三角形造型,可以取下盖子的干燥盒主体内壁是平整的,对应的盖子侧边是梯形造型
0
Reply
请问两边不带温度计的模型在哪里啊?三个文件里都没有啊?
The designer has replied
1
Reply
标准版在这里https://makerworld.com/zh/models/67281#profileId-71174,因为标准版是最先上传的然后改了几版,所以这边我重新上传了带温度计的版本,怕搞混了
0
Reply
Replying to @lloydliu :
谢谢,那两个不带温度计的就到上面的链接里下载?
0
Reply
Replying to @Petsuf :
是的
0
Reply
Great idea! Thank you for the model...
2
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
很棒的設計!*****
Other Issues:系統問題.不讓我評5星.*****(我有正確打印出來。)
The designer has replied
1
Reply
谢谢你的手动五星~系统五星不重要,大家开心最重要~
(Edited)
1
Reply
Boosted
I have only printed 1 part so far - it has worked out well.
2
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Printed great!
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
效果非常好
1
Reply
printed great!
1
Reply
Print Profile
0.2mm layer, 2 walls, 20% infill
Slowed down the speeds for silk PLA. Results speak for themselves.
1
Reply
Print Profile
0.2mm layer, 3 walls, 20% infill
Perfect
1
Reply