Tall Japanese Ido style lamp with center post lamp

The Shade measures 120 mm height x 70 Width

Lamp with walls, base and top:

235 mm height by 150 mm width

Print 4 of the walls V2, 1 Base V2 , and 1 each of the Top V2 piece, the CLBaseSM1.43, and the ClosedCyl-1.42 shade.

Pieces fit together snugly and require no glue or screws.

First feed the plug cable through the hole in the base and up through the threaded E14 socket holder.

Slide the e14 fassung base onto the cable and connect the wires to the e14 socket.

Screw the socket into the base holder.

Attach the CLBaseSM1.43 collar (holder for shade), onto the e14 socket with e14 collar.

Fit the shade into the holder.

Attach the four walls to the base, the thicker side of the insert to the outside. The walls should be flush with the holder.

Attach the top.

See pictures.

No supports required for printing

The fassung-lamp socket ( e14-28 mm):
https://www.amazon.de/dp/B097K4YNL9

The electrical cable and switch:
https://www.amazon.de/dp/B002DAOX58

The E14 Bulb used here:

https://www.amazon.de/dp/B0B5MPL9MX

The slicer settings for the base, walls, top and e14 short neck:

.20 mm Standard

(All standard settings and speeds, Aligned seam settings)

Filament: Eryone Matte PLA+ Black

The slicer settings for The Shade:

Filament: Sunlu Meta Cream White

.20 mm Standard
Infill % - 100 , Rect
Wall Loops - 6
Top Shell - 3
Bottom Shell - 6

Seam Position- Random