Boost Me (for free)
With Boosts you support me to buy more filament and invest time for tests and new designs.
After remixing beautiful iPhone Standby Mode Dock (designed with OVERWERK) from genius Scott Yu-Jan:
I decided to create this complete new design with following features:
You can simply print only the parts you need. You do not have to print all parts. If you dont need Apple Watch and/or AirPods docks, you can print only simple side covers.
From the Frame-Adapter Print-Profiles MAX/PLUS Frame_Adapters(V1 to V4) and STD Frame-Adapters(V5 to V9) you can choose one suitable for your iPhone/Case. Allocation including dimensions you can find in Table below:
If the listed Frame Adapters in Table above are not suitable for your iPhone/Case, you can use optionaly one of modifiable STEP-files which you can find under Raw Model Files. You can adjust the inner cave of the Adapter with CAD-Software to match your Phone/Case size.
If you dont have any experience with CAD-Software and you can not modify Step files, let me know which dimensions you want and for which case. After Boosting me I can provide a customized version especially for you :).
Most components are simply plugged into each other.
Apple Watch charger have to be pressed into the recess.
The Magsafe are fixed in place with thin double-sided adhesive tape, some of them don't need tape and can be also only pressed in.
The Transparent MagSafe which I used is this one (JSAUX 15W Mag-Safe): https://amzn.to/4gBnK8W (affiliate Link)
Recess in Modell for Magsafe is 56,2mm diameter.
Frame adapters should be fixed to the housing with thin strips of double-sided adhesive tape, as shown in pictures below.
All cables can be routed inside the housing in the recesses provided in the direction of the rear cover hole.
The Ejector must be assembled with two shafts, after that you can install the Frame Adapter, which prevents that the shafts falling out :).
please make sure that the holes of the Base-Model are free from Support remains. You can use for example small Drill bit or pin to remove and push these out.
Optional:
You can fix all cables together with a Tape or something else, so that only one cable comes out of the housing.
At the bottom I glued small pieces of felt so that it is more quiet on the table and does not rattle.
Assembly/Disassembly Video:
Have Fun and enjoy.
Please contact me if any issue.
please provide Pictures of your makes ;)
30.11.2024 Update: uploaded new Ejectors with different Logos and Christmas-things ;)
https://makerworld.com/en/models/834862#profileId-779887
07.12.2024 Update: Print Profile for optional horizontal and 45 degrees covers for Watch added: Horizontal and 45 Degrees Watch Covers Optional
Thanks for picture @oksamot
14.01.2025 Update: Added Adapter Frames V9NC, V9XS and V9L for iPhone Minis to Printprofile STD Frame-Adapters.
02.02.2025 Update: Base-Models (MAX and also STD) updated to make it symmetric. There are now on both sides suitable cutouts for AppleWatch- and AirPods-wires.
You can now mirror existing left and right covers (AirPods/Watch) to asselbe it on the other side of the dock.
To Mirror the Model, open the Print-Profile (3mf-file) in Bambu-Studio, click on the model which you want to mirror, right click on the model and then click on mirror in Y-Axis.
Also added additional AirPods-Docks for bigger/wider AirPod cases (29mm width and for SpigenLock).
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (322)