Philips One Blade Travel Case

Remixed by

Philips One Blade Travel Case

Remixed by
Boost
124
220
92

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

0.2mm layer, 3 walls, 15% infill
0.2mm layer, 3 walls, 15% infill
Designer
7.4 h
2 plates
4.9(41)

A1 Mini - Full Size - 0.2mm layer, 3 walls, 15% infill
A1 Mini - Full Size - 0.2mm layer, 3 walls, 15% infill
8 h
2 plates
4.3(3)

Open in Bambu Studio
Boost
124
220
92
47
282
168
Released

Description

This case was specifically created to hold the Philips One Blade razor with the blade inserted optimally. 

To facilitate rapid drying after using the still wet One Blade, I have included strategic openings in the design of the case. 

In case you are interested, you can find the model of this case that I purchased through the following link: 

https://www.amazon.it/dp/B0CG6WXFCH?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Even if it is not identical, you are free to organize the internal space in the way that you find most comfortable for your needs. 

You will need the use of 6 screws of size M3x20mm, mounted as shown in the photos attached to the product.

 

 

 

Comment & Rating (92)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 3 walls, 15% infill
This turned out great. I was a little hesitant to start printing it because I hadn’t gotten the screws yet, but I found a file to print my own screws which worked perfectly for this project.
The designer has replied
0
Reply
thanks for your rating, can you leave the link of the screws below so someone else can use it
0
Reply
Replying to @FrancescoM :
You can find the ones I used at https://makerworld.com/models/841652 but if you search the screw size you’ll find several options. But the one I used definitely works. And the post has all kinds of sizes available.
(Edited)
0
Reply
Boosted
Lovely to print Assembled it with M3 screws
The designer has replied
Show original
0
Reply
Thank you for the excellent rating
Show original
0
Reply
Boosted
Print Profile
A1 Mini - Full Size - 0.2mm layer, 3 walls, 15% infill
Perfect even with just two colors and no AMS. The only drawback perhaps is that the old-style charger does not fit
Show original
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
The designer has replied
0
Reply
Thank you for great rating.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
The designer has replied
0
Reply
Thanks for the great rating
0
Reply
Now bolted and it's perfect
The designer has replied
Show original
0
Reply
thanks, but you forgot to give me 5 stars :-))
0
Reply
Replying to @FrancescoM :
Oh, I had already given five stars I didn't know that five stars could be given again with the boost
Show original
0
Reply
Amazing design!
The designer has replied
0
Reply
Thanks for the great rating
0
Reply
Replying to @FrancescoM :
You earned it, love that I won't be breaking heads while traveling anymore!
0
Reply
Boosted
Perfect Print.. Perfect Profile, Perfect Design.THX..
The designer has replied
0
Reply
Thank you for great rating
0
Reply
Thank you for great rating
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
printed without problem 🆗✅
The designer has replied
0
Reply
Thank you for great rating
0
Reply
Replying to @FrancescoM :
thanks!
0
Reply
Love the print. Fits perfectly. The only issue I have is the lids holes for the screws broke off when I was lining it up. It was a bit tight. I re-printed and sanded down a touch to reduce some friction. But great work sir!! Cheers! Not seeing where I can leave 5 stars for ya...
The designer has replied
0
Reply
Thanks for the review. You can put 5 stars in the print profile from your application.
0
Reply