Mini Pooper - Removable - Bambu A1, A1 Mini by dimensionaldesignky

dimensionaldesignky

3D Printer>3D Printer Accessories

GIF

Print Profile(2)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

A1 Specific

Designer

1.8 h

2 plates

3.9(10)

p1s Glass profile - 0.2mm layer, 3 walls, 15% infill

Designer

2.5 h

2 plates

4.0(2)

Open in Bambu Studio

Boost

147

Released

Description

The Mini Pooper

A1, A1 Mini Removable Poop Bucket

I wanted a small lightweight poop bucket, as mine doesn't have much waste, as I don't use auto flow cal and rarely change filament.

You can remove the bucket and let it fall into a container for any multi color prints with excessive waste.

I included a petg glass like filament profile for the bucket

If you use the glass profile, you may have to clean up the top of the viewing window with a debur tool or knife

I also included a solid bucket with no viewing window, and one with a hex viewing window

Design was inspired by Rober7Crow's design found here - https://makerworld.com/en/models/688468

I just needed a smaller lightweight version with no handle, maybe you do too.

**Please auto orient the model before you print, sorry for needing this extra step

**You can scale the bucket 98-99% for a tighter fit, if needed

Hope you enjoy it

Boost Me (for free)

Comment & Rating (28)

@dkgoodrich

Thank you for downloading!

@user_3756900678

Print Profile

A1 Specific

Bed Adhesion Issue:very poorly sliced. I had to stop it a couple layers in because the model is balancing on a corner and it would have failed.

The designer has replied

@dkgoodrich

You don't think it's a little odd others aren't having bed adhesion problems but you are? Thanks for the one star, I remember my first 3d printer too.

(Edited)

@user_3756900678

Replying to @dkgoodrich :

the print profile is sliced very poorly. see image of how it started to print. the print would have failed as it cannot print that much of an over hang. if you switch the orientation of the part so there’s more surface area there wouldn’t be a problem.

@dkgoodrich

Replying to @user_3756900678 :

All you gotta do is flatten it on the build plate. Why do we have to spoon feed everything? Its a simple oversight that’s fixed with a single click

@theskyisfixed

Print Profile

A1 Specific

the sliced profile prints with most of it in the air except for the lowest edge, which led to a failed print and the rails being a little rough. love the design though

The designer has replied

@dkgoodrich

Yeah you gotta flatten it on the build plate brother, sorry for the inconvenience.

@theskyisfixed

yeah, can you do that on the mobile app? I was feeling lazy that day… sorry, I’m new to Bambu. do you upload a sliced profile or just a part? because maybe you could fix that for us lazy people. sorry for the extra work…

(Edited)

@user_292326261

Print Profile

A1 Specific

It kept messing up

The designer has replied

@dkgoodrich

Read the description next time and you'll see that you need reorient the model. But thanks

@user_2049800770

Boosted

Print Profile

A1 Specific

Very useful and does not take up too much space.

The designer has replied

@dkgoodrich

Thank you brother

@LittleTimmy

Print Profile

A1 Specific

didn’t work

The designer has replied

@dkgoodrich

Gotta flatten it out on the build plate

@datboi

Print Profile

p1s Glass profile - 0.2mm layer, 3 walls, 15% infill

it’s a bit flimsy and tends to be really loud on the printer

The designer has replied

@dkgoodrich

Thanks for your feedback, you can print the bucket @ 98-99% scaling if you would like it to attach more secure. I run my loose with a dot of museum putty in between the two parts