Whale by Áron Pozsár

Áron Pozsár

Household>Decor

IP Report

Print Profile(6)

All

P1S

P1P

X1 Carbon

X1E

H2D

A1 mini

Optimized support, 3 sizes, 0.2mm layer

Designer

14.9 h

3 plates

4.8(208)

0.12mm layer, 2 walls, 15% infill

3.6 h

1 plate

4.8(51)

PLA 0.2mm layer, 2 walls, 10% infill, Low polygon version

2.2 h

1 plate

4.8(6)

0.12mm layer, 2 walls, 15% infill

4.8 h

1 plate

4.3(4)

Click to see more

Open in Bambu Studio

Boost

3449

6179

370

518

6.3 k

2.4 k

Released

Description

Boost Me (for free)

huge thanks for every boost!

About the model:

Minimalist whale sculpture reflecting the animal's natural elegance.

Print info:

Scale it up as much as you want, but keep the custom support! I created the print file using a different color for the base, but printing it with only one color is absolutely fine too.

For easy and reliable support removal, avoid adaptive layers* and use my 0.2mm print profile.

*Adaptive layers and supports don't pair well. If you set a 0.2mm Z distance for the support you only keep this value valid if you use 0.2mm layer height all along. With adaptive layers each layer has a different height, therefore the Z distance value is practically impossible to keep. The support might get much closer to the part than intended, resulting a strong bond.

Commercial License:

Membership

Click the 'Join' button to subscribe for Commercial License Membership

Join

Comment & Rating (370)

@Leopardopedia

Large Sized print, supports nearly impossible to get off

The designer has replied

@pozsar

Did you use the 0.2mm print profile?

@Leopardopedia

Replying to @pozsar :

I just used the standard profile provided with the post. I didn't have my PC on, so I had to use my phone, didn't edit anything

@pozsar

Replying to @Leopardopedia :

Then the problem might be the filament setup. What filament were you using? In the standard profile generic PLA was set.

@Norkius

Print Profile

Optimized support, 3 sizes, 0.2mm layer

Came out great, was not mentally prepared for my son to ask about the snowy whale with skis, but hey, that's life.

@pozsar

This made my day.:) Maybe I should rename the model.

@miaomeow

That's adorable hahahahaha

Show original

@user_370974012

Boosted

Print Profile

PLA 0.2mm layer, 2 walls, 10% infill, Low polygon version

Was great

@NinjaAsok

like it... a Whale Guppy hybrid :-)

@jeecups

Boosted

Very nice model! I printed the large size using the designer’s print profile. If you have AMS, I highly recommend to use PETG as your support layer interface (if using PLA as your main material). Doesn’t add too much print time and allows the supports to almost fall off. mine came off all in a single piece, leaving virtually no evidence on the bottom of the model. I used some no-name matte PLA.

(Edited)

@user_710222161

Boosted

Print Profile

Optimized support, 3 sizes, 0.2mm layer

Scaled by 50% w/Bambu Studio & printed on P1S/AMS Combo w/Bambu Labs PLA. Functioned flawlessly

@user_1694941759

Print Profile

PLA, adaptive layers, 2 walls, 10% infill, 3 sizes

Support Issue:They wouldn't come off at all for me. Otherwise, it would have been a beautiful model.

Show original

@NinjaAsok

Sorry to hear you had problem..Did you read the description on the profile ? What kind of filament did you use ?

(Edited)

@user_1694941759

Replying to @NinjaAsok :

See photo. I also dried the filament beforehand. 8h 50ºC

Show original

@NinjaAsok

Replying to @user_1694941759 :

Surly a very nice filament, but the used profile is for the Bambu PLA filament... that's what it is meant to be used for... if using non Bambulab filament you need to run a set of different calibrations and save your filament profile to get the same accuracy, that is very hard or more or less impossible to include in a profile in Bambus profilesystem that works on every type of filament.

@user_3523879841

Boosted

Print Profile

Optimized support, 3 sizes, 0.2mm layer

very nice

@Peps

Hello! What type of PLA did you use?

Show original

@user_3523879841

Boosted

Replying to @Peps :

Bambu basic only 1 wall

@NinjaAsok

Removed the adaptive profile since so many had problems with it.... uploaded a new low polygon profile instead, hope this one works better for you, printed 4 times with different filament myself... looks real good in Silk PLA and almost better in PLA Matte :-)

@user_2343863940

Boosted

Print Profile

Optimized support, 3 sizes, 0.2mm layer

Beautiful model. I had the issue with the supports sticking even after increasing Z distance, then took the time to read what the designer wrote about not using variable line heights. The version with only 1 plate and 0.2 layer heights comes out perfect on Bambu A1 and the supports popped off easily. The version with 3 plates (medium) did not work for me on either of the 2 attempts.

@pozsar

I decided to make some new description changes according to this. Thank you so much for sharing!

@user_2343863940

Boosted

Replying to @pozsar :

Ahh great! I just read it and it makes more sense which one to click now. Thank you :)

@snakestrom

great print supports came off in one piece

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Get Commercial License