PTFE Tube Adapter - Creality Space Pi

EXA Studio
3D Printer>3D Printer Accessories
IP Report

PTFE Tube Adapter - Creality Space Pi

EXA Studio
Boost
29
40
28

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini
Original - 0.08mm layer, 2 walls, 15% infill
Original - 0.08mm layer, 2 walls, 15% infill
Designer
39 min
1 plate
5.0(6)
Extended - 0.08mm layer, 2 walls, 15% infill
Extended - 0.08mm layer, 2 walls, 15% infill
Designer
44 min
1 plate
5.0(3)
Open in Bambu Studio
Boost
29
40
28
7
95
49
Released

Description

Boost Me (for free)

Your boost will make my day! 😀

After searching everywhere for a PTFE tube adapter for my Creality Space Pi, I couldn’t find one that works with the original silicone plug to seal the filament dryer when not connecting to the PTFE tube. So, I made my own! This PTFE Tube Adapter - Creality Space Pi fits perfectly with the original silicone seal and keeps the PTFE tube securely in place. It only takes 30 minutes to print with 2.5g of filament. Material with temperature resistant is recommended since the dryer heats up to 70°C when in use. (PETG works fine in my case)

 

Required:

  • 20mm PTFE Tube (You can cut it from the spare PTFE tube that came with the printer)

Guide:

  • Insert the original silicon seal on the top and the 20mm PTFE tube from the button

  • Insert the assembly through the hole on Creality Space Pi

  • Insert the PTFE tube from the printer through the silicon seal

Known Issues:

  • No known issues

Updates:

  • 09/11/2024 - Added a version with tube holder and cutout for the popular vent spacer

  • 12/11/2024 - Make the tube holder hole through to prevent hard-to-remove supports (thanks to @azslow3 for the suggestion)
creality
creality accessories
creality space pi
PTFE
PTFE tube
ptfe tube allignment
ptfe tube connector
ptfe tube guide
tube
tube adapter
tube connector
tube guide
filament dryer
PTFE adapter

Comment & Rating (28)

(0/5000)
@azslow3
Boosted
Print Profile
Extended - 0.08mm layer, 2 walls, 15% infill
The adapter fit perfectly and original part will not be lost. But I think the modification can be improved. Automatic support is hard to remove, especially from the hall, and the tube is too loose there (in primary part the hall is way deeper, it has no such problem).
0
Reply
@lees890119
Thanks for the suggestion. I'll try to figure out an improvement to make it possible to be printed without support.
0
Reply
@lees890119
Just checked the old model again. If you're using my print profile, I've included a support blocker in the hall, so there should only be a support on the tube holder (which I will try to improve in future versions).
0
Reply
@azslow3
Boosted
Replying to @lees890119 :
I was writing about "tube holder" hall in the extended profile version. Sorry for misleading terms I have used in the original comment. I have just re-download the profile, to be sure I have not messed something. You have support blocker for primary hall, but not for tube holder. Also tube holder hall has bigger diameters (~4.44mm vs 4.10mm), that explains why tube is loose in it.
0
Reply
@user_3038058334
Boosted
Print Profile
Original - 0.08mm layer, 2 walls, 15% infill
Flawless print and a perfect fit. Thanks for sharing.
0
Reply
@lees890119
Thank you for the nice image!
0
Reply
@user_2777242192
Print Profile
Original - 0.08mm layer, 2 walls, 15% infill
It fit perfectly, and removing the PTFE tube reveals a factory-like integration, appearing quite discreet
Show original
0
Reply
@Dingo76
Boosted
Print Profile
Original - 0.08mm layer, 2 walls, 15% infill
Printed well, excellent model Just what I was looking for
Show original
0
Reply
@lees890119
May I inquire what you are seeking
Show original
0
Reply
@Dingo76
Boosted
Replying to @lees890119 :
My apologies, I mistakenly reviewed the wrong model among all the listings My apologies I have adjusted the review I meant a different model here on Maker World
Show original
0
Reply
@lees890119
No problem, thank you for the correction ❤️
Show original
0
Reply
@Dingo76
Boosted
This is exactly what I was looking for! It also allows me to properly use a PTFE tube in my Creality printer
The designer has replied
Show original
0
Reply
@lees890119
I'm glad you like it, thank you
Show original
0
Reply
@jgelwix
Print Profile
Extended - 0.08mm layer, 2 walls, 15% infill
Great model!
0
Reply
@lees890119
Thank you!
0
Reply
@user_4121720412
Boosted
Print Profile
Original - 0.08mm layer, 2 walls, 15% infill
Just what I needed. Easy print. Works great. Thanks so much!
0
Reply
@lees890119
Great that you like it! Thank you.
0
Reply
@user_4121720412
Boosted
Thanks so much! I appreciate no longer having the PTFE tube swallowed by the drier.
The designer has replied
0
Reply
@lees890119
Great that it helps!
0
Reply
@Na8en101
Boosted
Works Great
The designer has replied
0
Reply
@lees890119
Thanks for you comment!
0
Reply
@junz
Print Profile
Extended - 0.08mm layer, 2 walls, 15% infill
0
Reply
@lees890119
Thank you!
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Creality Space Pi Motor

Creality Space Pi Motor

Attila_G
2
18
4
Pipe / tube reduction / adapter

Pipe / tube reduction / adapter

Nagy
4
50
64
CREALITY SPACE PI AMS RISER (SANJA3D) MOUNT SIMPLE

CREALITY SPACE PI AMS RISER (SANJA3D) MOUNT SIMPLE

DUKEZ
6
6
3
1/2 Pipe Thread to 3/8, 1/2, 3/4 and 1" Hose Barb

1/2 Pipe Thread to 3/8, 1/2, 3/4 and 1" Hose Barb

We Be Printin'
19
538
409
PrivacyTermsGuidelinesFAQCookie SettingsHot Searches
© 2025 MakerWorld