charmander maori
charmander maori
Print Profile(1)
Description
Project: charmander huerforge.hfp
Print with 100% infill, 0.08mm layer height and 0.16mm base layer
The model is 175.24x174.19mm in size.
You can print at higher layer heights below the minimum depth of 0.8mm.
The maximum depth is 2.6mm and the actual depth is 2.3mm
Filaments used: PLA PolyLite Black Transmission distance: 0.3
PLA BambuLab Basic Brown Transmission distance: 2
PLA BambuLab Basic Orange Transmission distance: 5
PLA PolyLite White Transmission distance: 5
This print uses 4 unique filaments.
Swap Instructions:
Start with Black At layer No. 10 (0.88mm)
change to Brown At layer No. 17 (1.44mm)
change to Orange At layer No. 23 (1.92mm)
change to White for the rest.
Boost Me (for free)
If you like my models, support me with a boost
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)