Spider Leg Cup Holder
Spider Leg Cup Holder
Print Profile(1)
Description
Don't Let this Ominous Spider's Appearance Fool You! It's Actually Quite Friendly…
Here is a piece of decor/semi-useful object to add some spice to your home this fall! Simply set your drink on its web and watch as it holds it in place!
Taking ~2 Hours to print all of the parts, this spider will be up and running with plenty of time before the big holiday arrives!
Slicing Notes for Non-AMS Users (like myself):
-There is a pause on layer 10 for the Web Coaster for you to switch from white to black filament.
Required Supplies:
-All Printed Parts
-Super Glue (For End Caps)
Assembly is as follows:
STEP 1: Attach the Webbed Hinge to the body of the spider with one of the Hinge Pins. |  |
STEP 2: Then attach the Web Coaster to the Webbed Hinge with the other Hinge Pin. |  |
STEP 3: Using super glue, attach one (or two) Hinge Caps to the ends of different rows. You DO NOT want to block both ends of the tunnels. |  |
STEP 4: Starting from the non-plugged end, slide the Hinge piece in as you line the legs up one at a time. (Top to bottom leg order: Big, Small, Small, Big). PART 2: After completing step 5, repeat Step 4 on the other side. |  |
STEP 5: Super glue the other Hinge Cap to the other side, sealing the the Hinge inside of the tunnel. PART 2: After completing Part 2 of Step 4, repeat Step 5 on the other side. |  |
STEP 6: Fold that sucker down and give it a test! |  |
Enjoy!!
License
Comment & Rating (1)