a cute mini bag I use to carry my car and wall charger when I travel .but you can use it for make up, or anythings you want.
you will need 2 magnets (4x2 round) see link below .
the print is without Ams because never use TPU in AMS .
I highly recommend Use UHU stick glue on all your plate to help you remove the Tpu at the end of the print.
how to print :
Disable ams and load the TPU in external spool.
The plate will have 1 pause .
you will need to change the color manually ( when the printer will do the pause , clic on close, go to filament on the screen, unload the TPU, load Pla , then clic on resume . be careful to close the windows that tell you the print is in pause, don't stop it . the printer will ask it to you several time)
how to build : ( see photo)
1/ insert the pin and the washer , secure with a drop of glue. wait for its totally dry.
2/ cut the pin overhang
3/ glue the 2 magnets in their holes.
my others designs
https://makerworld.com/en/@Mimihomedecorat
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)