Overview

F-117 Kit Card (with movable bomb bay doors that print-in-place!!).  Perfect for aviation enthusiasts that want to build and showcase their planes!

Check out the full airplane kit card collection → linked here!

Profiles

• Kit With Frame
  • plane in a kit card format ideal for gifting to others
• Kit No Frame
  • plane without a kit frame ideal for assembly right off the printer

Filament

As shown:

• Bambu Lab PLA Black
• Bambu Lab PLA Matte Green
• Bambu Lab PLA Gray
• Bambu Lab PLA Yellow

Tips

• Model requires close tolerances to ensure snug but not tight or loose fit
  • Make sure the model cools to room temperature before assembly
  • Ensure filament is properly calibrated with no excessive over extrusion
  • If there is some over extrusion the parts may need to be lightly sanded at interfaces for fitment
• Ensure good bed adhesion
  • Make sure printer is fully calibrated
  • Make sure print bed is clean & dry (soapy water is my favorite for cleaning - simple & works)
  • Make sure filament is dry (wet filament can generate non-continuous flow that can cause bed adhesion issues)
  • Cooling & Temps - make sure they are correct for your printer, build plate, and filament
  • Smooth PEI plate is recommended

Assembly

• Remove all pieces from the kit
• Debur as needed to smooth edges
• Turn over the fuselage and carefully open the print-in-place doors (no worries…they can be reattached if they pop off)

• Insert bombs into bomb bay

• Insert tail to fuselage to top side of fuselage

• Insert stand leg into fuselage

• Insert baseplate to stand leg

• Enjoy!