SLIDE BOX - NO AMS NEEDED

Copyright Claim

SLIDE BOX - NO AMS NEEDED

Boost
1171
2121
134

Print Profile(2)

All
X1 Carbon
P1S
P1P
X1
X1E
A1
A1 mini

0.2mm layer, 2 walls, 10% infill
0.2mm layer, 2 walls, 10% infill
Designer
3.2 h
2 plates
4.7(82)

0.28mm layer, 2 walls, 10% infill
0.28mm layer, 2 walls, 10% infill
3.2 h
3 plates
5.0(7)

Open in Bambu Studio
Boost
1171
2121
134
135
2.3 k
906
Released

Description

MODERN DESIGN SLIDE BOX

 

I would like to introduce you to my SLIDE BOX.


it is a simple modern design which fits in every household.

 

You don't need an AMS for it. Everything is designed for it.

 

The assembly is also very simple. Just plug everything together and you're done. If the slider is not in the guide the first time, don't panic, you can also remove it later with a little skill in the assembled state and reposition it.

 

if it is a little more difficult to open, simply oil it a little


The holder for the slider just needs to be plugged together in the same way as the side parts.

 

Have fun printing

 

Boost Me (for free)

Boost - if you like it

 

It works great for me.
 

If you like my work/project consider supporting me with these options:

This article/post/text or the print profile as well as the finished print may not be used for commercial purposes.

Have fun printing

TBG

 

Comment & Rating (134)

Please fill in your opinion
(0/5000)

We need more people to make things with no AMS. Not everyone has one and it is hard to find models that done need one. Keep up the great work!
11
Reply
I guess you can always reslice but definitely nice to have it already set up for no AMS. I have one, but it can be so much quicker, and less wasteful, to print single colours and slap it together with some CA glue.
0
Reply
I agree! I try to add "No AMS" printing capabilities in my projects as well, such as my recent headphone stand design, which has snap fits. Like you said, not everyone has an AMS.
0
Reply
I actually just print as normal. It looks for the AMS but then it’s ok. It might say 8 hours when it’s really 2 or 3.
0
Reply
The box printed perfectly with the provided profile, no adhesion issues with PLA, however, it slides poorly, the hatch does not open fully.
The designer has replied
Show original
0
Reply
Nice
0
Reply
I put a lil bit of lubricating oil on the very edges of the sliding lid and slid it open and closed a few times and it freed mine up super well!
(Edited)
1
Reply
Great print, thank you! Wonderful to print something with more colors without an AMS. Printed in PETG and added a small piece of red carpet to the bottom of the box. Needed to oil the lid hinges a bit to get rid of the friction.
The designer has replied
0
Reply
thx, today it will come something new :-)
1
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
difficult to get lid to fit, cool box tho.
1
Reply
Useful box :)
The designer has replied
0
Reply
THX
0
Reply
Excellent!!!!!
The designer has replied
0
Reply
Nice
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
A very good print
Show original
0
Reply
printed nice
0
Reply
Love the design. With a little bit of silicon grease the slider works great. Very cool to see multicolored prints without an AMS. Printed it in Royal Purple Sparkle PLA and matte black.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Super clean and functional, I love it. No issues printing.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
good print
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.