this is lugia hueforge color match from hueforge enjoy it!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 155.67x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 1.4mm

Filaments Used:
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Silver Transmission Distance: 2
PLA+ Esun Dark Blue Transmission Distance: 2
PLA+ IIID Max Fuchsia Transmission Distance: 8
This print uses 4 unique filaments

Swap Instructions:
Start with White
At layer #7 (0.64mm) swap to Silver
At layer #10 (0.88mm) swap to Dark Blue
At layer #13 (1.12mm) swap to White
At layer #15 (1.28mm) swap to Fuchsia for the rest.