Slim Wallet (V5) - print in place by MakerVerse Designs

MakerVerse Designs

Tools>Gadgets

Print Profile(8)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

Creality Ender-5

0.15mm layer, 2 walls, 7% infill

Designer

2.1 h

1 plate

4.4(515)

2 color ams print by object 0.15mm layer, 2 walls, 7% infill

1.9 h

1 plate

4.5(33)

PETG - No brim - Single & Multi-color

5.9 h

2 plates

4.5(15)

Single Color [0.15mm layer, 2 walls, 10% infill]

1.5 h

1 plate

4.3(9)

Click to see more

Open in Bambu Studio

Boost

2491

5248

726

620

8.7 k

5.6 k

Released

Description

There´s an updated Version (V6) for TPU:

https://makerworld.com/en/models/928636#profileId-892240

-------------------------------------------

A print-in-place slim wallet that offers space for 7 cards and a drawer for cash.
I looked for a long time for a wallet that had enough space for cash, but I couldn't find one so I made this one myself.

This is the Updated Version of Slim Wallet (V4):

New Version: better diameters of the springs so they don´t break
cards snap in and they don´t fall out as before
I rounded the corners a bit to make it feel better
it´s only 17mm thick
It´s print in place
has a cash drawer with enough room
has place for up to 7 cards
The drawer snaps in and holds its position

-------------------------------------------

Version without the cash drawer: https://makerworld.com/en/models/719764#profileId-650613

Thinner Version for 3 cards and cash: https://makerworld.com/en/models/853423#profileId-802049

-------------------------------------------

If you want to sell printed parts from my designs or want to get the .step files of my models you can become a member of my Patreon: https://www.patreon.com/c/makerversedesigns

Have fun with it and leave a like or subscribe if you like it!

If there are any suggestions for improvement, feel free to write a comment.

Comment & Rating (726)

@m3d4v3

just printed this and as soon as I put a card to it the tab that holds the cards in broke, useless

The designer has replied

@user_1706288470

same !

@EVERYTHINGPLUSU

thanks for saving me the time

@Fubars

same here, plus the coin drawer just falls out

@user_1233512898

Boosted

US Credit Cards DO NOT fit.

@user_2209187621

@Ahmfity

every other standard card from all over the world fits great 👍😃

@user_1233512898

Boosted

Replying to @Ahmfity :

They will go in if they go in diagonally and are metal cards. I am not risking putting any in plastic cards in which I fear would jam. BTW all cards are the same dimensions.

@T63D

Boosted

Print Profile

0.15mm layer, 2 walls, 7% infill

Scaled up 2% in slicer and works great for my American sized cards

@user_1233512898

Boosted

I am assuming you are using Studio to do that. Is there a control to easily increase the size?

@Dodecahedron

Replying to @user_1233512898 :

there is the square with an arrow

@user_1233512898

Boosted

Replying to @Dodecahedron :

Thank you.

@user_3470729688

7 Canadian cards and broken 😆

@Steve.czuper

🤔I count 8

@RealNima

@zackza

lol is this a new joke meme to say you are using your country's cards? hah

@AiOGajo

I liked the idea, but the first time using it it broke the card support :(

@AiOGajo

printed again and had the same issue... I am using PLA.

(Edited)

@thepiguy

You are probably using American cards. They are a different size than what the creator designed them for. To solve this, try making the wallet 2% bigger.

@thepiguy

Replying to @AiOGajo :

Try scaling it up 2%.

@user_3057782130

Boosted

thankyou. I remixed V4 to include an AirTag holder. would be great to see this in the next design or added extra.

@salocin

great idea

@user_2766643734

Replying to @salocin :

Nah fr,That'sThats thee only way, my current wallet has an air tag slot, itz really helps me locate my wallet when I'm on the go.

@user_924461006

Are you going to end up posting it as a remix? I’ve got some spare AirTags and would love to put one with my wallet.

@zanegosling

Design came out well printing in PETG however when adding in cards it snapped the tab on one of the corners. The drawer slides in and out well, and locks in place. I might try again and scale the size up just a tad so that the tabs aren't under as much stress.

@sunnymishra

One card got stuck behind the cash drawer while using seven cards, even with non-embossed cards. Still really good. Working fine with 6 Cards

(Edited)

@user_978454448

Could you make the coins box thicker to fit an AirTag inside? The AirTag is 8mm thick but 2.5mm of it can be press fitted in the base of the drawer into a 25.5mm hole. Put the hole in one corner to max available space with the white part of the AirTag touching both walls of drawer. So the drawer has to be about 5.5mm deep to hold the white section of AirTag + coins. The 2.5mm metal section can be fitted into the bottom of the drawer. The number of 7 cards is perfect, but take into account that some are 0.8mm thick like ID and others 1.3mm like bank with embossed numbers.

@Xandet_The_G

Print Profile

0.15mm layer, 2 walls, 7% infill

It has become my daily!

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

Related Models

Print Profile(8)

Description

There´s an updated Version (V6) for TPU:

https://makerworld.com/en/models/928636#profileId-892240

Version without the cash drawer: https://makerworld.com/en/models/719764#profileId-650613

Comment & Rating (726)

License

Related Models

box (print in place)

Dudeney's dissection (print-in-place)

Print in place strong box

Geometric transformation (print-in-place)