Hello everyone!

I'm glad to present my first creation of pot series. A modern pot retroilluminated with ledstrip inside!

Inside the pot, at top of perimeters, there is a guide for install a ledstrip for light your plant inside the pot. You can use a ledstrip with a maximum width of 10 mm and there is a hole to take the power cable out of the pot, as you can see on this photo:

Personally, I've decided to use a BFT-Lighting ledstrip with cold and warm white (You can bought it here).

for the power supply and control of the LED strip, I opted for a control unit that could be easily connected to my Philips Hue home automation system, and I installed it on the back of the vase while still remaining towards the center of the vase. You can buy the same product I got here.

Furthermore, as a power socket for the control unit, I preferred to use a USB-C socket with a simple + and - connection, which you can purchase here.

The final result is this:

The pot has drainage holes in the bottom to allow excess water to drain away. I recommend using a tray underneath that has a minimum size of 240x170 mm.

If you liked this model, give it a nice like, print it too and share your result!