The Framed Frost Dragon
A frost dragon! This time, a fierce frost dragon that is set within an ornate frame with varying degrees of depth. The dragon is both part of the frame, and coming out of the frame. There is a ton of detail in this print and it comes to life from just 4 colors - black, blue, grey blue, and white. You can of course omit both blue colors and still have a fantastic print.
This one comes in two sizes: 220x223mm (Large) and 135x150mm (Small).
As usual you may scale the X/Y axis but NOT the Z axis - if you need a custom size and are concerned about losing details, just message me and I will create the profile you need :)
Want to sell physical copies of my designs? Head to my Patreon page for a license
The print profile includes everything you need, but if you wish to set things up yourself see below:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Max Depth is 2.6mm and the Actual Depth is 2.7mm
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA ANYCUBIC Blue Transmission Distance: 4.3
PLA Overture Gray Blue Transmission Distance: 3.3
PLA SUNLU White Transmission Distance: 10
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #10 (0.88mm) swap to Gray Blue
At layer #22 (1.84mm) swap to White for the rest.
Check out my other Dragon related prints here, or browse some selections below (click the images)!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (20)