Gift Box w/ 120 Screws

Gift Box w/ 120 Screws

Boost
1662
2680
466

Print Profile(2)

All
P1S
P1P
X1
X1 Carbon
X1E
A1
A1 mini

Version 1 - 0.2mm layer, 2 walls, 10% infill
Version 1 - 0.2mm layer, 2 walls, 10% infill
Designer
45 h
11 plates
4.9(262)

A1 mini
A1 mini
49.6 h
14 plates
4.9(13)

Open in Bambu Studio
Boost
1662
2680
466
156
4.6 k
11.5 k
Released

Description

This is inspired by the “Annoying Gift Box” that most people (including my wife) have seen on TikTok.

 

The size of the original is quite small, and the 3 different versions of it didn't give me exactly what I was looking for. I wanted a large internal volume (4"x4"x4"), and I wanted this to look like a Christmas present with zero visible screws. So obviously I spent far too much time modeling this up and figured that I would share it for free instead of charge people for it :)

 

3 Boxes

Ribbon & Bow

120 total screws

 

You do need a few dabs of CA glue to hold the inner box posts in place. :)

You can add glue for the white threaded part as well but it works without it

 

Thanks for viewing, and take a look at my other models for things that I have designed for myself because the originals weren't exactly what I was desiring

 

EDIT: I have also designed a bin with magnetic slide lid for storing the multitude of screws. 3 partitions to separate by color :)

https://makerworld.com/en/models/82815#profileId-88321

Comment & Rating (466)

Please fill in your opinion
(0/5000)

Boosted
Thanks for the great design. How is the bow installed? Is it glued?
The designer has replied
1
Reply
It is either a snap fit or you can use glue if you want
1
Reply
Boosted
Replying to @Mechengg :
Thank you. Also, thank you for posting the STP files, so we can do small edits as needed. For example, I am experimenting now with having the inner lid and its posts as one part. Will post the result. The other find... the inner lid needs supports when printed on P1P.
0
Reply
Replying to @SWElite :
How are you planning on holding this lid down? it looks like you maybe accidentally edited out the shoulders that the screws use to hold the lid down. To be clear what you are showing is absolutely not how it was designed with tolerances or functionality
1
Reply
What a fun, playable gift box design. My son took liking to the Matryoshka doll aspect of this and asked me to print him one. I think he’ll enjoy it… or snap one of the screws. Fingers crossed 😅 One personal learning for printing this was… use your most durable material like PLA-CF to print the inner-most box, because that’s the very thing that screws will get screwed into. No supports needed. My auto settings added the brims - I had a debuting tool ready, so no issue there. I think you’d be TOTALLY fine by skipping all 4 posts. I was super-glueing these posts and trying to get them aligned with the holes - I ended up temporarily posting the 4 corner screws as spacers so that I wouldn’t accidentally superglue the lid right onto the box. Plz refer to the attached photo. I hate to say anything negative - thank you x3 to the designer for sharing this - but I think the design could been just a touch cleaner by skipping the posts and their associated holes altogether.
The designer has replied
1
Reply
You can skip the posts if you want, I wouldn't be offended. The posts however do serve a specific purpose. If the person opening the middle box opens the top side where the inner box opens, then the bottom half of the middle box doesn't need to be removed to open the inner box. Secondly it acts as one of those "gotcha" moments when the person opening it thinks they have discovered a short cut just to have it backfire. But if you want to skip the posts that is totally fine with me 🙂
3
Reply
Replying to @Mechengg :
@Mechengg I was just wondering if there were any specific settings you prefer for Enders? For example should i change it from "Middle" to the one that makes it slightly small to fit perfectly? I was also wondering if i could add more that 120 screws? i thought i saw some more holes. Thanks.
0
Reply
Replying to @parkerr :
I have not used an Ender to date so I can't comment on settings that you should use, sorry. There are currently room for 120 screws as some screws go through more than 1 hole
0
Reply
Print Profile
Version 1 - 0.2mm layer, 2 walls, 10% infill
Easy to print, very well laid out, and was a hit at our offices white elephant.
The designer has replied
4
Reply
Haha I was hoping that somebody else was making one for a work event 😂😂
2
Reply
Would you be willing to share what brand/colour that blue filament you used is?
2
Reply
Replying to @Feejai :
Happily, that is Inalnd Cyan Silk PLA from Microcenter.
3
Reply
The print profile is no longer public
Used black box, red ribbon, red middle box and white internal box, looks great! (also messed around with the screws)
4
Reply
Nice colors! Can you share the link for the mini screwdriver please?
0
Reply
Replying to @Papadansmaman :
The mini screwdriver is included as a part of this model
1
Reply
Replying to @Papadansmaman :
It is in the file, works great.
1
Reply
I can't get it printed. It seems to be a problem with layer time. Does anyone have a hint?
The designer has replied
0
Reply
I'm sorry I don't know why yours is sliced like that. this is what it looks like on my end, it's a consistent speed.
0
Reply
Replying to @Mechengg :
OK. Then my setting must be different. I print with the X1C. There are two other users on reddit who have exactly the same problem with this print. I have already adjusted Order of walls but without any improvement. Here is another picture of the problematic layer.
0
Reply
Replying to @lexxmm :
Do you have a link to the thread? I just looked through the past 24hr of threads on Bambu subreddit and didn't find anything that looked like it
0
Reply
Print Profile
Version 1 - 0.2mm layer, 2 walls, 10% infill
This is fun - one caveat is that it takes almost as long to assemble than it would be to unwrap, so it is a double-edged sword. The wife's birthday is in mid December, waiting with baited breath to hand over her worst nightmare - I may be single after that day. I do have some constructive criticism on the model - - It would be great to get rid of the need for glue-ing (there is a remix now, sadly only saw it after I already glued and assembled) - The ribbons are kinda flimsy when taking off the supports - I cracked one. (Nothing a re-print on a single didn't fix, I probably should have been more careful) - I re-printed the included screwdriver tip standing up - it gave me a better result since no supports are needed (no cleanups, no residue and marks)
(Edited)
The designer has replied
5
Reply
Hey thanks for the rating and feedback on the design! First off, I love the color scheme. Secondly I really do truly appreciate feedback on design elements. I actually printed both versions of the lid box (posts detached and posts built in) and the tolerances around the holes especially around the corners came out less than adequate and not up to my (probably overly) high standards. This is the reason for the print orientation and splitting. Potentially the remix is able to fix the issue, but it ended up being a non-starter for me. Lastly I wanted to comment on the ribbon breaking. I didn't have any issues with flexing the plate and removing the supports on my 4 full prints to date. I let my wife remove the supports because she enjoys destroying things so I'll ask her if it's hard to do or if you are the modern equivalent to hulk Hogan 😉
1
Reply
There's a holiday tradition of giving my father in-law a present wrapped in the most annoying way possible. I think we've found this year's winner. As a bonus, I'm seriously thinking the present inside might be a small screwdriver.
The designer has replied
8
Reply
There is a small screwdriver in the print file for you 😊
5
Reply
the wiha 28103 is my favorite stubby nut driver in my toolbox
0
Reply
No matter what I do I get this later bulge right as it starts printing the layer after the support on the base.
1
Reply
More pictures.
0
Reply
Print Profile
Version 1 - 0.2mm layer, 2 walls, 10% infill
it printed out great. It was a fun project and my buddy that got the gift loved it
2
Reply
Boosted
Such a fun print. I did this for my twins 11 birthday. only issue I had was the side ribbons are very easy to break, but that was easily fixed by upping the infill for this parts.
The designer has replied
1
Reply
I noticed the ribbons when I finally printed one set in silk filament. Silk definitely doesn't have the same strength that the regular PLA does but upping walls to 4 when using silk made it work
0
Reply