I made this HueForge art of cute anime character. Original image is from Midjourney.

Sife of this model is 112 × 99 × 150 mm

Instruction for HueForge print:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 3.4mm and the Actual Depth is 1.8mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Aurapol Wisteria Winds Transmission Distance: 5.6
PLA Nebula Silver Transmission Distance: 6.4
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Wisteria Winds
At layer #11 (0.96mm) swap to Silver
At layer #15 (1.28mm) swap to Jade White for the rest.

Feel free to print and dont forget to share your prints :) Happy printing