Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 55x165.91mm in size
You may print at higher layer heights below the Min Depth of 0.32mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA anycubic Grey Transmission Distance: 2.8
PLA Kingroon White Transmission Distance: 8
PLA+ Kingroon Green Transmission Distance: 4
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #10 (0.52mm) swap to Grey
At layer #19 (0.88mm) swap to White
At layer #26 (1.16mm) swap to Black
At layer #30 (1.32mm) swap to Green
At layer #35 (1.52mm) swap to White for the rest.
Comment & Rating (9)