Designer Crescent Decorative Object, Vase, Vessel by Deltaprints

Deltaprints

Household>Other House Models

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

Scaled FOR A1 MINI - 0.28mm layer, 2 walls, 5% infill

2.6 h

1 plate

4.9(22)

NEW VERSION 0.28mm layer, 2 walls, 5% infill

5.3 h

1 plate

4.6(91)

0.24mm layer, 3 walls, 5% infill, no supp p1p/p1s w aux fan

3.9 h

1 plate

4.3(3)

Arachne WG+painted support, 0.28mm layer, 2 walls, 5% infill

2 h

1 plate

4.0(2)

Open in Bambu Studio

Boost

1831

3070

255

160

2.4 k

1 k

Released

Description

A truly extraordinary decorative object. A moon with a small bowl attached for flowers and decorations.

Standard size: 230x230x90mm. Easily scalable smaller or larger if required.

Please read the print instructions!

It is recommended to use tree supports for the lower part of the base and the overhang of the bowl.

My Recommended Print Settings:

Layer thickness: 0.2

Walls: 3

Infill: 15% Hilbert

Shells: Top and bottom 5 layers

Printing speed: 100mm/sec

Support: as shown in the pictures.

Exclusive Models and Commercial License

https://www.patreon.com/deltaprints

What material do I use for printing?

https://amzn.to/46MY70E

Boost Me (for free)

Do you like the model? If you like, support me and help me create more such great models.

Comment & Rating (255)

@Salahunreal

MISLEADING why you use AI generated pictures and not using real pictures of the printed designed?

@Broonstein

Thanks for pointing that out, I almost missed it.

@SeljD

what makes you think it's AI generated and not just rendered, those are two different things

@MoleculeCreator

Replying to @SeljD :

look at the plants in the vase in the back. what's going on with those? it's clearly ai generated.

@user_1764023104

Scammer

@ChristianL

@Lexy

Print Profile

NEW VERSION 0.28mm layer, 2 walls, 5% infill

I printed the moon today with Bambu matt PLA and used the settings that were specified. the surface didn't come out nice :-( layer 0.20 otherwise setting left. a tip?

The designer has replied

@angel4964

Thanks for sharing! Did you see my other design and profiles? Wet filament?

@angel4964

Replying to @angel4964 :

Or a simply wrong temp or ventilation setting

@Lexy

no - with silver is the same Problem

@slinrednas

the model images already show errors

Show original

@slinrednas

very poor quality, does not work at all

Show original

@user_3840535161

horrible 💩💩💩💩💩💩💩

@lov3d

Print Profile

NEW VERSION 0.28mm layer, 2 walls, 5% infill

I had already read in the reviews here that the surface wasn't that good. For this reason I turned on “Smoothing”. But the problem arose for me too. But it was neither the filament nor the temperature. A lot has already been printed with the filament with the same settings. Not so good :-(

The designer has replied

@angel4964

Sorry my friend, I don’t know why in my test there is not this problem but I’m trying another HQ profile with a lighter infill and variabile h. layer for fix this defect 💪🏻

@docsnyder78

I think something was wrong with the settings.

@3DinPlastic

Replying to @angel4964 :

You are the designer with a secondary account right? 🤣🤣

@Magnusjr

Print Profile

Scaled FOR A1 MINI - 0.28mm layer, 2 walls, 5% infill

Very beautiful, mine didn't print very well but I don't understand why 🤷‍♂️

The designer has replied

Show original

@angel4964

Here I am! What flaws have you given me, my friend?

Show original

@Magnusjr

Replying to @angel4964 :

In some parts it's perfect, in others as you can see in the photos. But it might be a problem on my end 🤷‍♂️ I used Bambu Lab matte charcoal PLA

Show original

@angel4964

Replying to @Magnusjr :

Opaque filaments require some adjustments. This is a very challenging print that required a lot of testing. Have you seen my other print profiles ready to be printed? (500)

Show original