Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 176.08x235.58mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Hatchbox Purple Transmission Distance: 2.6
PLA BambuLab Matte Lilac Purple Transmission Distance: 2
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Blue Gray
At layer #16 (1.36mm) swap to Purple
At layer #19 (1.6mm) swap to Lilac Purple
At layer #21 (1.76mm) swap to Sakura Pink
At layer #25 (2.08mm) swap to Jade White for the rest.