Print Profile(1)
0.08mm layer, 2 walls, 100% infill
Designer
7.3 h
1 plate
Open in Bambu Studio
Boost
42
91
10
7
56
25
Released
Description
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 184x230mm in size
You may print at higher layer heights below the Min Depth of 0.96mm
The Max Depth is 2.7mm and the Actual Depth is 2.6mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #17 (1.44mm) swap to Blue Gray
At layer #20 (1.68mm) swap to Red
At layer #24 (2mm) swap to Jade White for the rest.
Boost Me (for free)
if you enjoyed this print, please boost me!
Thank you
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial
Comment & Rating (10)