Desk organizer modular

Copyright Claim

Desk organizer modular

Boost
38
98
9

Print Profile(1)

All
A1
P1S
P1P
X1 Carbon
X1E
X1

0.16mm layer, 2 walls, 15% infill
0.16mm layer, 2 walls, 15% infill
Designer
4.3 h
3 plates
5.0(2)

Open in Bambu Studio
Boost
38
98
9
2
57
23
Released

Description

Desk modular organizer V2


20 Sep 24 V1: Release version 

15 Oct 24 V2: Improved stackability of the containers (redesigned chamfers) 


Introduction:

This sleek and modern desk organizer is designed to keep your workspace tidy and stylish. The organizer consists of a large base tray and two stackable smaller trays, allowing for flexible storage options.Ideal for holding small tech accessories like earbuds, styluses, USB drives, or office supplies.


Materials:
I’ve used this materials:
Bottom container - „Bambu lab“ PLA Matte Ash Grey

Top containers - „Bambu lab“ PLA Matte Orange


Printing and assembling guidelines:
I would recommend to use layer height 0.16 mm because of the chamfers of top and bottom sides of the parts. You could use higher layer thickness with adaptive layer height option.


Wash the bed with soap or detergent before print.

 

I hope you enjoy use of it! Thanks! 

Comment & Rating (9)

Please fill in your opinion
(0/5000)

Printed great, however the smaller one did not fit the middle-sized one😮
The designer has replied
1
Reply
Hello there, unfortunately it is supposed to be like that in order to avoid overhang on the bottom side of the small and medium size containers. I hope you could still enjoy experience with this organizer 😉
0
Reply
Replying to @master3ddd :
I see, your pictures looked like they are more uniform with the bottom one. If it's by design, then never mind the "not fittning" part :)
(Edited)
0
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
looks so good in PLA Matte Black
The designer has replied
0
Reply
Hi there, looks fantastic! I didn’t thought that single colour might looks also good! thanks for sharing 😉
0
Reply
great print worked well
The designer has replied
1
Reply
happy to hear that! enjoy 🙂and don’t forget to share printing profile just in case it was not mine
0
Reply
hey guys, I would recommend to use 0.16 mm layer height due to the chamfers on the top and bottom of the parts, that will reduce steps on it. but I also think that 0.20 mm should work as well, but definitely no way for higher layers height. Hope you would love this organiser!
1
Reply
Print Profile
0.16mm layer, 2 walls, 15% infill
0
Reply
No more

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.