Is this Halloween?

Celebrate the upcoming event with this cutie! The flying ghost is designed to create the illusion of flying through, bound only to the grave it recently escaped from!

Model:

I have created three sizes for the grave as I wasn't sure which fits my needs and how big it needs to be to counterweight the ghost. The middle sized one is the standard one (named as fg_grave), but please feel free to print whichever you want to.

Scaling of the objects is set to 10% for the print profile. At that scale the assembled print is 14cm tall and 11cm long from which the ghost itself is appr. 6cm tall.

Print:

The print itself is easy and simple, although there are some important notes:

• I printed the model at 10% scale, but please feel free to do whatever scale you want to :)
• Print the grave with 100% infill to make it as heavy as possible so it can create a counterweight to the ghost
• Chains are supposed to be layed flat with support (normal) and only on the build plate. Otherwise the small bridges will be supported which is not necessary
• The ghost should be printed as lightweight as possible. I have set the infill to 0% but it should still work ti have it at 10-15%

Assembly:

The assembly is easy, although you should be very careful removing the supports after the print succeeded. Especially the chains require some patience. After that, the three parts can be put together, it doesn't ever require to glue them.

I've also painted my parts in the colours steel and stone but I am sure printing them in the chosen colour will also work just fine!