Dice Tray - DnD - Braided Look

Copyright Claim

Dice Tray - DnD - Braided Look

Boost
116
298
27

Print Profile(2)

All
A1 mini
P1S
P1P
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
4.2 h
3 plates
5.0(14)

Wood PLA - 0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill
Wood PLA - 0.6mm nozzle, 0.18mm layer, 2 walls, 15% infill
Designer
4.3 h
3 plates

Open in Bambu Studio
Boost
116
298
27
32
178
104
Released

Description

Hello everyone,

I have designed a dice tray for DnD, which has a cool, braided look on the side. The bowl has an inner diameter of 14.5 cm and an outer diameter of 18 cm and can therefore also be printed on the A1 Mini. An AMS is not necessary, as the three parts are stuck together. The bowl can therefore be customized. Scaling should also be possible without any problems.

The shell in the photos was printed with Wood-PLA and a 0.6mm nozzle, sanded and oiled - but 0.4 and any other material should be easy to do.

I also glued a fils to the bottom. But it can also be used without. I hope you have fun! I'd love to see your trays if you print this :)

Boost Me (for free)

If you enjoy my design, I’d really appreciate your support with a boost!
Thank you so much! :)

Comment & Rating (27)

Please fill in your opinion
(0/5000)

Boosted
Really good. Loving the braids!
The designer has replied
1
Reply
Yes, the braids were really challenging to design for a beginner like me :D Thanks for the boost!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
very nice in wood and white. added felt for soundproofing.
The designer has replied
0
Reply
That's what I did too. Yours looks really nice!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Nice model! Used dark wood PLA and some light brown matte PLA. I will definitely glue some felt to the bottom plate.
The designer has replied
0
Reply
Thanks! And thank you for the boost! :)
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
reduced X/y to 90%, love it.
0
Reply
I like it :) I reduced it to 90% in x and y, and added a small filet to the top part since I was not going to sand it. Printed in Fiberlogy Fibersilk Inox and matte black. Planning to get som black leather or felt for the bottom.
(Edited)
0
Reply
Until that, take that second boost. Well deserved for the clean design, and the efforts in the photos 🤌
The designer has replied
1
Reply
Thank you so much for the boost! :)
0
Reply
Awesome!
The designer has replied
1
Reply
Thanks! :)
0
Reply
Didn't download it, but I'll definitely come back to do so when I'll test wood filament ! Really gorgeous dice bowl !
1
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Beautiful result
The designer has replied
0
Reply
Thank you so much!
0
Reply
Print Profile
0.2mm layer, 2 walls, 15% infill
Great design!
The designer has replied
0
Reply
Thanks a lot! Glad you liked it
0
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.