Nearly every part and accessory for Bambu printers comes in the same tiny cardboard box. Only the label on the box is different. So why make storing parts and accessories complicated by taking them out of the box and making custom little holders for everything? JUST STORE THE BOXES! This one storage rack will hold hot ends, complete hot ends, cutters, wipers, silicone socks, PTFE connectors, 4-1 PTFE adapters, and a lot more because Bambu uses the exact same box for pretty much every accessory for every model. Got multiple types of Bambu printers? No problem. P1, A1, X1, Mini… they use the same little cardboard box for parts and accessories. Print these in different colors to help with organization. Stack these in a vertical row for more space. If you mount two or more next to each other just leave a finger worth of space between them so the boxes are easy to remove. There are countersunk holes for screws, but command strips are more than strong enough so you can stick this on any vertical surface. If you tossed your boxes already, no problem, I designed some replacements you can print here https://makerworld.com/en/models/680401#profileId-608759
Comment & Rating (22)