Photobox + Turntable V2

Photobox + Turntable V2

Boost
1176
2509
223

Print Profile(4)

All
P1S
P1P
X1
X1 Carbon
X1E
A1

0.28mm layer, 2 walls, 10% infill
0.28mm layer, 2 walls, 10% infill
Designer
6.8 h
2 plates
4.9(133)

IMPROVED TURNTABLE! - No wobble
IMPROVED TURNTABLE! - No wobble
Designer
2.1 h
1 plate
5.0(28)

(almost) no infill
(almost) no infill
6.9 h
2 plates
4.8(18)

56mm higher, 0.28mm layer, 2 walls, 6% infill
56mm higher, 0.28mm layer, 2 walls, 6% infill
9.4 h
1 plate

Open in Bambu Studio
Boost
1176
2509
223
147
2 k
713
Released

Description

Professional grade, completely 3D printable photobox with a turntable.

 

My previous photobox was liked by many, but people still had very good suggestions which i now implemented into this completely new design.

 

I've included a center mark on the turntable, which lets you place your item dead center on the table. Also included notches on the side, so you can rotate the table exactly 90 degrees, which lets you take photos at every side of the item.

This also helps if you're using the turntable for 3D scanning.

 

I made the table as big as possible, but still left enough clearance so it would not touch the sides of the photobox.

 

There's endless uses for this, as it can be used as photobox, 3D scanning boot, paint booth etc.

 

EDIT: 20.11 2024 -  I uploaded print profile and raw file of NEW improved turntable!

 

 

 

 

 

If you decide to download raw files, then please turn the turntable 180 degrees, so it's flat on the table.

 

 

Commercial License

If you are interested in selling physical prints of my desings in your local or online store, or if you just want to support my work, go to:

https://www.patreon.com/Allar3D

 

 

 

 

Comment & Rating (223)

Please fill in your opinion
(0/5000)

Boosted
Print Profile
0.28mm layer, 2 walls, 10% infill
This came out great! Any backlight will show infill so just be mindful of that. With a forward facing ring light it's practically unnoticeable.
5
Reply
Boosted
Print Profile
(almost) no infill
The almost no infill version came out very well!
The designer has replied
1
Reply
Glad to hear that!
1
Reply
Replying to @Miro1337 :
Thank you for the profile :)
0
Reply
Replying to @Allar3D :
You're welcome :)
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Print came out PERFECT!
The designer has replied
1
Reply
Thank you! :)
0
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
This printed perfectly! Now I just need to find things to take pictures of hahaha
2
Reply
Print Profile
IMPROVED TURNTABLE! - No wobble
awesome!
1
Reply
Print Profile
(almost) no infill
This is very nice there was just a little bit of imperfection at the top on each side. Does not effect use of design, though.
The designer has replied
0
Reply
Glad to hear that!
0
Reply
Print Profile
IMPROVED TURNTABLE! - No wobble
The designer has replied
1
Reply
did yours just snap in easy? I printed it but am having a difficult time assembling together, seems just a tad too big to fit
0
Reply
Replying to @CelestialSorrow :
It did not fit correctly but I didn't know until after I rated cuz the box wasn't done printing at the time. The print itself came out perfect but the "improved turntable" file seems to be a little too big. I ended up filing it a little bit with a debur tool and then forcing it in so now it's there but does not spin. I didn't want to fuss with reprinting because the turning acting wasn't an important feature to me.
1
Reply
Replying to @CelestialSorrow :
Sorry, i have now updated the improved turntable file.
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
Sehr gut
1
Reply
Nicely Done, thanks bundy. 😊🤠
1
Reply
Print Profile
0.28mm layer, 2 walls, 10% infill
I am very satisfied! Super
Show original
1
Reply

License

This user content is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.